Thermogravimetric characterization of ex situ polymethacrylate (EDMA‐co‐GMA) monoliths

Abstract

The thermo-molecular mechanisms associated with free radical synthesis of polymethacrylate monoliths offer an effective pathway to tune their pore characteristics. In this work, thermogravimetric analyses were used for ex situ characterization of polymethacrylate monoliths synthesised from ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA). Apparent activation energies of the polymeric monoliths were determined by using Ozawa-Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS) isoconversional methods. The number of degradation stages for the polymers were observed to be as follows: homopolymeric GMA and EDMA (2 degradation stages each) and polymeric EDMA-co-GMA monoliths (3 degradation stages). The relationship between apparent activation energy and extent of conversion showed that the degradation of monoliths is based on a complex multi-step reaction rather than a single reaction model. Kinetic parameters showed that an increase in the composition of EDMA and GMA above 20 % significantly enhances the thermal stability of polymeric EDMA-co-GMA monoliths under elevated non-isothermal conditions. E40/G60 and E60/G40 monoliths were identified as the most thermally stable monoliths from the kinetic analyses.

Synthesis of novel functionalized methacrylate copolymers and their copolymerization kinetics, thermal stability, and biocidal properties

“…At higher speed rates, a heat mismatch occurs between the outer surface and the interior of the deformed polymer. Since the polymer's outer surface gets hotter than the inside section, fragmentation on the outer surface consists of at higher temperatures due to the increase in the heating rate 33 …”

Experimental methods in chemical engineering: Differential scanning calorimetry—DSC

“…The versatility of the DSC is vast and researchers apply it to assess: coal,() cjceass,() waste,() catalysts,() minerals,() cement,() ceramics,() alloys,() and polymers. () Applications include: gasification,() pyrolysis,() combustion,() adsorption,() desorption,() calcination,() dehydration,() thermal stability,() phase transitions,() phase diagrams,() polymer crystallization,() glass transition, curing time, and reaction kinetics …”