Thermodynamic properties of dimethyl phthalate along the (vapour + liquid) saturation curve

Recommended vapor pressure and thermophysical data for ferrocene

“…The recommended values of vapor pressure for crystalline ferrocene are represented by the Cox equation (3) using the parameters given in table 10. Recommended vapor pressures and sublimation enthalpies obtained by using the Clapeyron equation are listed at rounded temperatures in table 11.…”

“…The SimCor method used here has been thoroughly tested [7], and it has been used previously to obtain recommended vapor pressure for several crystalline and liquid compounds [9][10][11][12][13][14][15][16].…”

Recommended vapor pressures for thiophene, sulfolane, and dimethyl sulfoxide

“…The first 512 levels were used in Eq. (6). The reduced moments of inertia I r for the methyl rotations were calculated according to Pitzer [53] from the optimized geometrical parameters of the molecule, I r = 5.139 × 10 −47 kg m 2 .…”

“…The SimCor method was thoroughly tested in our laboratory [1] and used to obtain recommended vapor pressure for several crystalline and liquid compounds [5][6][7][8][9][10][11][12].…”

Revision of the volumetric method for measurements of liquid–liquid equilibria in binary systems

“…Standard deviations of volumes of the individual phases in both ampoules σ(V A,I ), σ(V A,II ), σ(V B,I ), and σ(V B,II ) are present in Eqs. (12) and (13). To estimate these quantities, the errorpropagation law applied to Eqs.…”