Thermally Treated Waste Silt as Geopolymer Grouting Material and Filler for Semiflexible Pavements

Solouki, Abbas; Tataranni, Piergiorgio; Sangiorgi, Cesare

doi:10.3390/infrastructures7080099

Cited by 7 publications

(1 citation statement)

References 40 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Te results showed that the samples formed by the cement grout with 30% milled glass presented the best mechanical performance. Solouki et al [18] used traditional cement-based cement and geopolymerbased cement as grouting materials to characterize porous and grouted samples in terms of indirect tensile strength (ITS), indirect tensile strength modulus (ITSM), and moisture sensitivity. Experimental results: it was shown that the control samples grouted with cement-based materials outperformed geopolymer grouting in all respects.…”

Section: Introductionmentioning

confidence: 99%

Study of the Effect of Grouting Material Strength on Semiflexible Pavement Material

Yang

Zou³

et al. 2022

Advances in Materials Science and Engineering

View full text Add to dashboard Cite

In this study, cement mortars with different strengths are poured into the large void matrix asphalt macadam material as a semiflexible pavement (SFP) material and the experimental research is carried out. The current research on SFP is mainly focused on the performance of grouting materials and the influence of grouting matrix materials on the overall mechanical properties of SFP and road performance. However, there are some flaws in the study of the influence of grouting material strength on the performance of SFP materials: the difference between the strengths of the selected grouting materials is relatively small, and in some studies, the chosen grouting material strength is low, which leads to insignificant improvements of SFP material performance; besides, the research indicators are also not very comprehensive. In this study, cement grouting asphalt macadam materials are selected as the research object to examine the effect of grouting material strength on the mechanical properties and road performance of SFP materials. Grouting materials with strengths of 19.8 MPa, 30.7 MPa, and 40.2 MPa were poured into the matrix asphalt macadam with a target void ratio of 24% and asphalt content of 2.9% to prepare the corresponding SFP test specimens. The SFP specimens were then subjected to the compressive test, flexural and tensile test, high-temperature stability test, and low-temperature crack resistance test, and the compressive resilient modulus was measured, thereby analyzing the effect of the cement slurry strength on the cement grouting asphalt macadam materials. The results show that when the strength of the cement mortar is 19.8 MPa, 30.7 MPa, and 40.2 MPa, the corresponding SFP material has better mechanical properties. When the strength of the grouting material is 40.2 MPa, the compressive strength of the SFP material is about the same as that of the grouting material. The strength is more than double that of 19.8 MPa and 30.7 MPa, and the flexural tensile strength and elastic modulus also have the above growth laws. The low-temperature crack resistance and high-temperature stability of the SFP material are enhanced with the increase in the strength of the grouting material. When the strength of the grouting material is 40.2 MPa, the mechanical properties and road performance of the SFP material are relatively better. This study provides a reference for strengthening the mechanical properties of SFP materials and boosting the crack resistance of SFP.

show abstract

Section: Introductionmentioning

confidence: 99%