Thermal Properties of Residual Agroforestry Biomass of Northern Portugal

Abstract

Biomass from forestry and agricultural sector provides an important contribution to encounter the government’s targets for increasing bioenergy production and utilization. Characterization of agricultural and forest wastes are critical for exploiting and utilizing them for energy purpose. In the present work agricultural and forest wastes and shrubs were sampled in two sites in north Portugal (Ave and Sabor basin) and subjected to Higher Heating Value (HHV) and chemical composition quantification. The HHV was evaluated according to the methodology described in Standard DD CEN/TS14918:2005. For the lignin content, the procedure was made by the Klason method and the extractives content was determined with the Soxhlet method. For agricultural and forest wastes the HHV values are identical with a range of 17 to 21 MJ·kg−1. However, shrubs biomass presentx slightly higher and statistically different values from agricultural and forest wastes, varying between 19 and 21 MJ·kg−1. Forest wastes contain higher levels of holocellulose compared to agricultural wastes and, with respect to extractive contents, this trend is the reverse. There is a general tendency for the woody components present thermo-chemical properties more suited for energy purposes, than the residues formed by the branches and leaves.

Waste Recovery through Thermochemical Conversion Technologies: A Case Study with Several Portuguese Agroforestry By-Products

“…The results obtained in the elementary analysis differed slightly and insignificantly from other studies [111][112][113][114][115]. These differences are related to the fact that the elementary analysis could have been determined using different methodologies from the one used in the present work.…”

Influence of Operating Conditions on the Thermal Behavior and Kinetics of Pine Wood Particles Using Thermogravimetric Analysis

“…Combustion is an efficient technology to convert biomass into energy, making it the technology of choice for both conventional power plants and domestic boilers [3]. Particularly in Portugal, biomass has been widely used for power generation and pellet production over the last two decades in order to meet the targets defined by the government [4]. Since 2017-when devastating wildfires flogged the central and northern regions of Portugal-to now, new dedicated biomass power plants have been built with a total capacity of around 100 MW, and there are currently more than 20 solid biomass power plants delivering more than 600 MW to the national power grid [5].…”

Resíduos sólidos urbanos de poda de gramíneas como fonte alternativa de energia: um estudo de caso na cidade de Rosana

“…O valor médio do PCS foi de 17,59±0,43 MJ kg -1 (Tabela 2). O valor de PCS obtido representa o potencial energético químico intrínseco à biomassa, ou ainda, a capacidade da matéria orgânica em oferecer energia térmica (Enes et al, 2019). Compreendendo que esta energia se encontra na forma química, pode ser aproveitada através da queima direta.…”