Thermal Properties of Li2BeF4 near Melting Point

Abstract

The LiF–BeF2 system is used as a heat transfer medium in molten salt reactors (MSRs). The thermal diffusivity of Li2BeF4 was studied using the laser flash analysis (LFA) method in solid and transition states. While the thermal diffusivity is shown to decrease slightly in solid-state Li2BeF4, it drops significantly at temperatures close to phase transition. The heat capacity of Li2BeF4 was measured by differential scanning calorimetry (DSC). Some differences were observed between the results obtained in cooling and heating modes. Thermal conductivity was calculated using thermal diffusivity-, density-, and heat-capacity data. The good thermal conductivity of the Li2BeF4 compound in solid and liquid states justifies its use as a heat transfer medium for molten salt reactors.

Thermal Properties of NaF–KF and NaF–KF–MgF2 Molten eutectic Mixtures: Experiment and Simulation

“…Thermal diffusivity was determined using an original technique specifically designed for molten media [13][14][15]. A small sample of the salt mixture was placed in a dedicated cell made of NP2 alloy, which was then positioned within a holder inside a high-temperature electric furnace.…”