Thermal Properties of Graphene based Polymer Nanocomposites

Abstract

Objective: Epoxy is a commonly used material for electronic components packaging, yet its inherent thermal resistance can't meet rising demands. To improve the thermal performance of Epoxy material, the high thermal conductivity of Graphene nanoparticles interspersed into the epoxy matrix. This paper focuses on experimental results on the thermal properties of Graphene-based epoxy composite. Methods: Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy used for elemental analysis. Guarded Comparative Longitudinal Heat Flow Technique, thermogravimetric analysis, digital scanning calorimeter, and thermogravimetric analysis used to determine thermal conductivity, Coefficient of thermal expansion, specific heat capacity and thermal stability as per ASTM standard respectively. Findings: Thermal decomposition temperature enhanced from 170 0 C of pure epoxy to 329 0 C for epoxy with 0.5 wt% of Graphene nanofiller, and it increased with an increase in filler loading, hence proving the thermal stability of composite improved with the addition of graphene nanoparticles. Maximum thermal conductivity of 0.43 W/mK and thermal diffusivity of 0.686 x10 -6 m 2 /s had recorded for 2 wt% of Graphene additives. Linear thermal expansion coefficient and specific heat reduce for the composite material with an increase in filler. Therefore, this indicates heat resistivity improved with minimum heat storage. An increase in stability, conductivity, and diffusivity with the decrease in expansion coefficient and specific heat capacity due to heat proves a favourable factor for thermally conductive material. Novelty: The easy method employed for material preparation, also the use of ultra-low filler content tends to reduce composite cost. Graphene-based Epoxy composites with modified properties represent a conceivable packaging material.