Thermal properties and calcium-magnesium-alumino-silicate (CMAS) interaction of novel γ-phase ytterbium-doped yttrium disilicate (γ-Y1.5Yb0.5Si2O7) environmental barrier coating material

Abstract

Rare-earth disilicates are promising candidates for thermal and environmental barrier coatings (TEBC) in gas turbines that safeguard SiCf/SiC ceramic matrix composites (CMCs) from thermal degradation and environmental attacks. Here, we report a systematic investigation on novel TEBC material, γ-Y1.5Yb0.5Si2O7. The γ-phase quarter molar ytterbium–doped yttrium disilicate exhibited low thermal conductivity (1.72 W·m−1·K−1 at 1200 °C) and reduced intrinsic thermal expansion (3.17 ± 0.22 × 10−6 K−1 up to 1000 °C), ensuring promisingly effective thermal insulation and minimized thermal stress with CMC substrates. Using density functional theory (DFT), the heat capacity of γ-Y1.5Yb0.5Si2O7 was predicted higher than that of undoped γ-Y2Si2O7. Comparing these predictions to results calculated using the Neumann–Kopp (NK) rule revealed only minor variations. A metastable CMAS interaction byproduct, cyclosilicate phase Ca3RE2(Si3O9)2, was identified based on energy dispersive X-ray spectrometer (EDS) and electron backscatter diffraction (EBSD) techniques, appearing at 1300 °C but disappearing at 1400 °C. The γ-Y1.5Yb0.5Si2O7 exhibited good CMAS resistance on both dense pellets and sprayed coatings, forming a protective apatite (Ca2RE8(SiO4)6O2) interlayer that effectively hindered CMAS infiltration at evaluated temperatures. The relatively higher Y:Yb atomic ratio (> 3) in the apatite grains indicate differential reactivity with molten CMAS and provides crucial insights into the CMAS corrosion mechanism. These findings highlight the potential of γ-Y1.5Yb0.5Si2O7 as a CMC coating material, emphasizing the need for tailored microstructural optimization as a thermal sprayed coating to enhance long-term performance in extreme gas turbine environments.