Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
MUSCAT is a new large-format 1.1 mm continuum camera for local and extra-galactic astronomy currently being installed at the 50 m Large Millimetre Telescope Alfonso Serrano, LMT. The focal plane is populated with 1458 feedhorn coupled Aluminium LEKIDs, cooled to 130 mk, and read out with 6 frequency division multiplexed RF readout chains, each with a 500 MHz bandwidth. The nominal mux ratio is $$\sim$$ ∼ 250 resonators per chain with an average spacing of 2 MHz between resonators. In each RF chain, the multiplexed waveform generation/decomposition is performed with the BLAST-TNG firmware on a ROACH2 FPGA board with a MUSIC DAC/ADC. The quadrature modulated IF signals are mixed to and from the LEKID readout band on a custom card that houses IQ mixers, a programmable synthesizer, and additional programmable input and output gain control and filtering. Within the cryostat, the RF signals are attenuated prior to reaching the focal plane array and then amplified at 4K. A novel software system controls all the programmable hardware and handles instructions from the LMT instrument control system to record and store observation data, as well as performing automated resonator retuning and providing results of quick look analysis to the telescope operators. In this paper, we present the detailed design and in-lab performance of the cryogenic and room temperature electronics, and the software control system.
MUSCAT is a new large-format 1.1 mm continuum camera for local and extra-galactic astronomy currently being installed at the 50 m Large Millimetre Telescope Alfonso Serrano, LMT. The focal plane is populated with 1458 feedhorn coupled Aluminium LEKIDs, cooled to 130 mk, and read out with 6 frequency division multiplexed RF readout chains, each with a 500 MHz bandwidth. The nominal mux ratio is $$\sim$$ ∼ 250 resonators per chain with an average spacing of 2 MHz between resonators. In each RF chain, the multiplexed waveform generation/decomposition is performed with the BLAST-TNG firmware on a ROACH2 FPGA board with a MUSIC DAC/ADC. The quadrature modulated IF signals are mixed to and from the LEKID readout band on a custom card that houses IQ mixers, a programmable synthesizer, and additional programmable input and output gain control and filtering. Within the cryostat, the RF signals are attenuated prior to reaching the focal plane array and then amplified at 4K. A novel software system controls all the programmable hardware and handles instructions from the LMT instrument control system to record and store observation data, as well as performing automated resonator retuning and providing results of quick look analysis to the telescope operators. In this paper, we present the detailed design and in-lab performance of the cryogenic and room temperature electronics, and the software control system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.