The study of dual-window random addressable ROIC

“…These columns are located on each side of the pixel circuit. If the dual-band sensors are of the same structure type, the two different wavelength sensors use two readout circuits to obtain the output signal simultaneously [3][4][5]. In infrared readout pixel circuit design, the pixel circuit layout area is limited by the sensor area.…”

Section: Introductionmentioning

confidence: 99%

Buffer direct injection readout integrated circuit design for dual band infrared focal plane array detector

Sun

Shieh

et al. 2013

SPIE Proceedings

View full text Add to dashboard Cite

This paper proposes dual-mode buffer direct injection (BDI) and direct injection (DI) readout circuit design. The DI readout circuit has the advantage of being a simple circuit, requiring a small layout area, and low power consumption.The internal resistance of the photodetector will affect the photocurrent injection efficiency. We used a buffer amplifier to design the BDI readout circuit since it would reduce the input impedance and raise the injection efficiency. This paper will discuss and analyze the power consumption, injection efficiency, layout area, and circuit noise. The circuit is simulated using a TSMC 0.35 um Mixed Signal 2P4M CMOS 5 V process. The dimension of the pixel area is 30×30 μm.We have designed a 10x8 array for the readout circuit of the interlaced columns. The input current ranges from 1 nA to 10 nA, when the measurement current is 10 pA to 10 nA. The integration time was varied. The circuit output swing was 2 V. The total root mean square noise voltage was 4.84 mV. The signal to noise ratio was 52 dB, and the full chip circuit power consumption was 9.94 mW.

show abstract

A low power readout circuit for 640×512 IRFPA with dynamic windowing readout

Zhou

Zhang

et al. 2014

2014 IEEE International Conference on Electron Devices and Solid-State Circuits

View full text Add to dashboard Cite

The study of dual-window random addressable ROIC

Cited by 4 publications

References 4 publications

A low-power, high-speed, programmable arbitrary windowing infrared focal plane readout circuit

A low-power, high-speed, programmable arbitrary windowing infrared focal plane readout circuit

Buffer direct injection readout integrated circuit design for dual band infrared focal plane array detector

A low power readout circuit for 640×512 IRFPA with dynamic windowing readout

Contact Info

Product

Resources

About

The study of dual-window random addressable ROIC

Cited by 4 publications

References 4 publications

A low-power, high-speed, programmable arbitrary windowing infrared focal plane readout circuit

A low-power, high-speed, programmable arbitrary windowing infrared focal plane readout circuit

Buffer direct injection readout integrated circuit design for dual band infrared focal plane array detector

A low power readout circuit for 640&#x00D7;512 IRFPA with dynamic windowing readout

Contact Info

Product

Resources

About

A low power readout circuit for 640×512 IRFPA with dynamic windowing readout