The presence of the “locking effect” when the fluid flows through the cylindrical throttle channels

Abstract

A study was made for the continuous flow of the working fluid through a cylindrical throttle channel (so-called “locking effect”). The flow of the fluid into the atmosphere and the change in absolute pressure at the inlet to the throttle channel ranging between 0.221 MPa and 0.24 MPa are studied. It was found that the pressure in the compressed section inside the throttle channel remains almost constant and equal to 4 kPa. A comparison is made of the experimental values of the flow rate determined for the same absolute pressure difference Δp in the separated and unseparated flow regimes. Knowing that the value of the flow coefficient μ in the zone of the existence of the “locking effect” can be determined from known data for the process of fluid outflow from holes with a sharp edge in a thin wall. Also, similar phenomena occur when fluid flows through small holes and slots in the guide, control and regulatory equipment of various hydraulic systems.