morfologia tem influência nas propriedades térmicas e mecânicas dos poliuretanos. Na década de 1990 e neste início de milênio, há uma nítida e maior preocupação com o meio ambiente. Uma das estratégias associadas à idéia de preservação do meio ambiente está ligada ao desenvolvimento de sistemas que não possuam compostos orgânicos voláteis (VOC's) [2] . No caso dos poliuretanos aquosos, eles são obtidos dispersando-se o poliuretano em água com o auxílio
IntroduçãoPoliuretanos segmentados (PU's) são largamente utilizados nas mais diversas aplicações devido à possibilidade de variação de sua estrutura química [1] . Geralmente a cadeia deste tipo de polímero consiste de segmentos "flexíveis" e "rígidos" que dão origem a uma segregação de micro-fases causada pela incompatibilidade entre os segmentos. Tal Resumo: Foi sintetizada uma dispersão aquosa de poliuretano (PUD) na qual o poli(propileno glicol) (PPG) foi utilizado como segmento flexível. O segmento rígido foi baseado nos reagentes isoforona diisocianato (IPDI) e a diamina hidrazina (HZ), produzindo um poli(uretano-uréia). A PUD assim obtida foi modificada com Na + -montmorilonita (Na + -MMT) para gerar nanocompósitos (CPUD's) com 1, 3 e 5 % de argila. Neste processo, o aumento do espaçamento basal das camadas de silicato foi provocado pela água sem necessidade de qualquer tratamento químico da argila. De acordo com as curvas de difração de raios X (XRD), os nanocompósitos obtidos apresentaram partículas de argila intercaladas com o polímero, enquanto a técnica de espalhamento de raios X de baixo ângulo (SAXS) detectou evidências de uma esfoliação parcial da montmorilonita. A esfoliação incompleta das partículas de argila indica re-agregação dos nanocomponentes (inicialmente delaminados na dispersão aquosa) durante a formação do filme. O grau de ligações de hidrogênio, avaliado por espectroscopia no infravermelho (FTIR), foi usado para investigar o efeito da argila no processo de separação de microfases do poliuretano e indicou uma tendência de perturbação da estrutura dos domínios do poliuretano com a presença da argila. A PUD exibiu valores de resistência à tensão na ruptura e alongamento na ruptura na faixa de 30 MPa e 1400% respectivamente. A adição de 1% de argila na PUD promoveu aumentos no módulo e tensão na ruptura de cerca de 230 e 20% respectivamente em relação ao polímero puro, sem perda significativa do alongamento na ruptura.
Nanocompósitos
Palavras-chave: Poliuretano, dispersão aquosa, nanocompósitos, SAXS.
Nanocomposites derived from Polyurethane Aqueous Dispersion and Clay: Influence of the Clay on the Morphology and Mechanical PropertiesAbstract: Waterborne polyurethane (PUD) was synthesized by using poly(propylene glycol) (PPG) as soft segment. The hard segment was formed by extending isophorone diisocyanate (IPDI) with hydrazine (HZ) producing poly(urethaneurea). PUD was reinforced with Na + -montmorillonite (Na + -MMT) to yield nanocomposites (CPUD's) with 1, 3 and 5% of clay. Water was used as swelling agent to make the basal space of silic...