The optimization of residual stress in arc bridge Hastelloy X components fabricated by Laser Powder Bed Fusion

Abstract

Laser Powder Bed Fusion (L-PBF) has been widely used in various elds, but due to the inherent complex thermal history and ultra-high solidi cation rate in the L-PBF process, detrimental residual stresses inevitably form inside the component. In this study, the formation mechanisms of residual stress and the strategies to reduce them were investigated during L-PBF of Hastelloy components. Components with simple block geometry were rst fabricated with different deposition strategies, i.e., scanning island size and rotation angle. The microstructure and residual stress of these samples were characterized. The optimal deposition strategy in terms of maximum tensile residual stress was then used to deposit the arc bridge components with complex geometry. The results clearly show that different deposition strategy is needed for components with complex geometry due to the change in cross-sectional area and the different heat transfer behavior between the new deposition layer and the previously deposited solid layer.Finally, the arch bridge samples with no warping deformation were achieved by optimized random scanning strategies and crossline scanning strategies. The results provided in this study thus provide a theoretical basis for tailoring residual stress during L-PBF of complex components.