The Mechanical Analysis and Comparative Performance Test of the Roller-Type Pulling Mechanism for the Whole Cotton Stalk Pulling Machine

Abstract

In order to address the common difficulties in pulling and harvesting whole cotton stalks, such as high pulling resistance, high miss-pulling rate, and high breakage rate, which severely hinder the recycling of cotton stalks, three different pulling mechanisms with different pulling principles (wrapping-type pulling mechanism, clamping-type pulling mechanism, transverse roller-type pulling mechanism) were designed. The pulling force on cotton stalks during the pulling process of the three different roller-type pulling mechanisms was compared and analyzed, clarifying the mechanism of roller-type whole cotton stalk pulling mechanisms and identifying situations with optimal pulling force. Field comparative experiments were conducted to compare the working performance of different roller-type pulling mechanisms in the field, and a comprehensive analysis of two key indicators in pulling cotton stalks, miss-pulling rate and breakage rate, was carried out. The results showed that the pulling method and pulling force of the pulling mechanism played a crucial role in the successful pulling of cotton straws. Comparative analysis of the three pulling mechanisms revealed that the clamping-type pulling mechanism had the highest pulling force. The standard deviation means of the missed pull rates for mechanisms X1, X2, and X3 were 0.83%, 0.59%, and 0.43%, respectively, while the standard deviation means of the breakage rates were 1.48%, 1.79%, and 0.49%, respectively. The enveloping-type pulling mechanism had a higher missed pull rate with an average of 8.32%, and the clamping-type pulling mechanism resulted in excessive breakage of cotton straw during operation, with an average breakage rate of 14.10%. In contrast, the transverse roller-type straw pulling mechanism performed the best in the field performance test, as it did not require precise alignment and had an average missed pull rate of 4.55% and an average breakage rate of only 7.55%. Considering the practical needs of agriculture production, the transverse roller-type straw pulling mechanism is recommended as the pulling device for cotton straw harvesting. The research results can provide a reference for the design selection of whole-plant straw pulling mechanisms.