The influence of interlayer cations on the photo‐oxidative degradation of polyethylene/montmorillonite composites

Abstract

The photo‐oxidative degradation of polyethylene/montmorillonite (PE/MMT) nanocomposite and microcomposite has been investigated. It has been found that the rate of photo‐oxidative degradation of PE/MMT nanocomposite and PE/Mn+MMT (where Mn+ stands for multivalent transition metal cation) microcomposites is much faster than that of pure PE. For the PE/MMT nanocomposite, the acceleration of photo‐oxidative degradation is due to the influence of MMT and ammonium ion, in which the influence of ammonium is primary. The decomposition of ammonium ion may create acidic sites on layered silicates; meanwhile, the complex crystallographic structure and habit of clay minerals could also result in some active sites. The reversible photo‐redox reaction of transition metal cations has a catalytic effect in the degradation of the polymer matrix. All these catalytic active sites can accept single electrons from donor molecules of polymer matrix and induce the formation of free radical upon UV irradiation. The generation of free radical leads to the oxidization and break of molecular chain. Thus, the materials suffer degradation and their mechanical strength decreases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3006–3012, 2004

Effect of Different Sterilization Methods on Biodegradation of Biomedical Polypropylene

“…In comparison of all sterilized samples, the G-PP samples have shown higher degradation and become liable to embrittlement. Generally, the elongation at break is a parameter to monitor the radio and photo-oxidation of polymers as it is very sensitive to the molecular and morphological changes undergone by the polymer during irradiation [23][24][25]. The results of mechanical properties indicate that drops of elongation at break correspond well to the results obtained by FTIR characterization and the viscometric measurements.…”

Structure–property relationship in chitosan‐based biopolymer/montmorillonite nanocomposites

“…A similar phenomenon has been observed in other polymer/clay nanocomposites systems. 21,22 Catalytic acid sites might contribute to the fast degradation in the early thermal stage of the nanocomposites in comparison with that of neat TM-CS.…”

Influência de estabilizantes na degradação foto-oxidativa de filmes de compósitos de SWy-1/poli(óxido de etileno)

“…O aumento da banda em 1720 cm -1 pode ser atribuído à formação de espécies carbonila (C=O) [11,24] e a banda em 3430 cm -1 é atribuída a formação dos grupos hidroxilas e hidroperóxidos (OH/OOH) [14,19,25] . A formação destas espécies e o mecanismo geral proposto para o processo de degradação do PEO são descritos na literatura por Kaczmarek e colaboradores [22] .…”

“…Em geral, os estudos de processos foto-oxidativos de materiais compósitos polímero/argila mostram que a presença da argila acelera os processos de degradação dos mesmos quando comparados ao polímero puro [11][12][13] .…”