The paper deals with the comparison of milling tools geometry after drag finishing with various times. The aim was to determine the influence of drag finishing on macro geometry of the solid cemented carbide mills. The article describes tool geometry deviance after grinding process and the influence of drag finishing on rake angle, flank angle and diameter of the tools. The cemented carbide material with chemical composition WC + Co (10%) was used for this research. The tools were manufactured on the Reinecker WZS 60 grinding machine from cemented carbide rod. The tool geometry of cutting tools was measured on ZOLLER genius 3 optical measuring machine. The drag finishing process was carried out on OTEC DF-3 Tools drag finishing machine with OTEC SIX 70/16 grinding granulate. It was found the accuracy of cutting tools manufactured on grinding machine, and the deviation of rake and flank angles was 2° and tool diameter was 0.08 mm.