The Importance of Noise Attenuation Levels in Neonatal Incubators

Abstract

Background: It is known that high noise levels can be harmful to preterm infants, causing physiological and psychological disorders. It is also known that premature babies spend a lot of time in an incubator. In this sense, many studies show that incubator noise levels can range from 45 to 70 dB. However, these differences in noise levels depend, fundamentally, on the wide range of methodology that can be used. This study aims to know the levels of noise from a fan in the incubator itself and how much it can isolate the noises coming from the outside. Methods: For this purpose, the noise levels of three incubators were measured within a sound-dampened booth for free-field audiometry. For the emission of acoustic energy, a pink noise generator was used; likewise, two microphones were placed, one inside the incubator cabin and the other outside, to determine the acoustic insulation levels of the tested incubators. Results: The incubators produced equivalent continuous sound pressure levels between 53.5 and 58 dB. Acoustic insulation analysis showed that levels varied from one incubator to another, between 5.2 and 10.4 dB. Conclusions: It is necessary to improve the acoustic insulation inside the incubator cabin and to reduce the noise levels of the motor fan. On the other hand, although the incubators are meeting the noise criteria set out in the IEC60601-2-19: 2009 standard of 60 dBA, under normal use conditions, they are still far from the limit recommended by the American Academy of Pediatrics (45 dBA).

Innovative instrumentation to strong reduction of the noise levels inside newborn incubators used in the neonatal intensive care units

“…Both the lack of sound intervals and the intensity can cause tinnitus, hearing loss, periods of deafness and even permanent deafness. Recently Fernandez-Zacarias et al [21] recognized that it is necessary to reduce the nL insulation inside the incubator cabin and especially that which is produced by the motor fan.…”