Slip at boundaries is possible in viscous flows: for instance, in the extrusion of foodstuffs, water-containing materials, and some polymers. There are two phenomenological descriptions of slip: The first is based on the presence of a very thin, low viscosity boundary layer and has been derived for capillary flow and extrusion: the second is based on a Coulomb-friction mechanism and has been derived for capillary flow only. After a survey of these results, the friction model is derived for the extrusion process. All calculations are a s simple as possible: twodimensional, Newtonian, isothermal, and with constant boundary layer parameters or coefficients of friction. A strong dependence of pumping characteristics and efficiency on the slip boundary conditions, and also on the extruder length in the case of friction, was found, especially when slip is only allowed for a t the screw surface. Exercises like these may help in understanding abnormal extrusion behavior of slippery materials in practice.