The Geometric Configuration of Lubricant Recesses of the Polymer Sliding Layer of the Bearing

Abstract

Polymers have gained a foothold in the international market and are actively utilized at a large scale in various industries. They are used as sliding layers in various types of friction units. However, there is a lack of research on their deformation behavior under different design conditions. This work is focused on studying the influence of the geometrical design of lubrication recesses in a polymer sliding layer operating under conditions of frictional contact interaction. The article investigated an element of bridge-bearing steel plate with recesses for lubrication. Two geometrical configurations of recesses are studied: the annular groove and spherical well in the engineering software package ANSYS Mechanical APDL. Polytetrafluoroethylene (PTFE) is considered an elastic-plastic sliding layer. A comparative analysis of two models with different geometrical configurations of cutouts for lubrication, with/without taking into account its volume in the recess, has been conducted. The article establishes that in the absence of lubrication in the recesses, large deformations of the polymer sliding layer occur. This effect negatively affects the structure as a whole. Changing the geometry of the recess for lubrication has the greatest effect on the intensity of plastic deformations. Its maximum level is lowered by almost ~60% when spherical notches are used for lubrication instead of grooves. The friction coefficient of the polymer has a great influence on the contact tangential stress. At the experimental coefficient of friction, it is lowered on average by ~85%. The friction coefficient of the lubricant has almost no effect on the deformation of the cell (<1%).