The Effects of the Mechanical Properties of Vascular Grafts and an Anisotropic Hyperelastic Aortic Model on Local Hemodynamics during Modified Blalock–Taussig Shunt Operation, Assessed Using FSI Simulation

Abstract

Cardiovascular surgery requires the use of state-of-the-art artificial materials. For example, microporous polytetrafluoroethylene grafts manufactured by Gore-Tex® are used for the treatment of cyanotic heart defects (i.e., modified Blalock–Taussig shunt). Significant mortality during this palliative operation has led surgeons to adopt mathematical models to eliminate complications by performing fluid–solid interaction (FSI) simulations. To proceed with FSI modeling, it is necessary to know either the mechanical properties of the aorta and graft or the rheological properties of blood. The properties of the aorta and blood can be found in the literature, but there are no data about the mechanical properties of Gore-Tex® grafts. Experimental studies were carried out on the mechanical properties vascular grafts adopted for modified pediatric Blalock–Taussig shunts. Parameters of two models (the five-parameter Mooney–Rivlin model and the three-parameter Yeoh model) were determined by uniaxial experimental curve fitting. The obtained data were used for patient-specific FSI modeling of local blood flow in the “aorta-modified Blalock–Taussig shunt–pulmonary artery” system in three different shunt locations: central, right, and left. The anisotropic model of the aortic material showed higher stress values at the peak moment of systole, which may be a key factor determining the strength characteristics of the aorta and pulmonary artery. Additionally, this mechanical parameter is important when installing a central shunt, since it is in the area of the central anastomosis that an increase in stress on the aortic wall is observed. According to computations, the anisotropic model shows smaller values for the displacements of both the aorta and the shunt, which in turn may affect the success of preoperative predictions. Thus, it can be concluded that the anisotropic properties of the aorta play an important role in preoperative modeling.

Fluid–Structure Interaction Aortic Valve Surgery Simulation: A Review

“…This type of analysis allows one to study structures by solving mechanical continuum equations. CFD simulation provides information about the pressure and velocity fields in the fluid domain by solving the continuity and Navier-Stokes equations [122][123][124]. This approach does not take into account structural fields and therefore does not allow the assessment of structures such as valve motion.…”

Numerical Method for Geometrical Feature Extraction and Identification of Patient-Specific Aorta Models in Pediatric Congenital Heart Disease

“…Over the past several decades, traditional modeling methods such as computational fluid dynamics (CFD) have been used to assist surgery [9][10][11]. This method has found applications in medical research and helps fill gaps in knowledge about processes occurring in aortas with different pathologies.…”

The Best Material from the VII Congress of Russian Biophysicists

“…In the field of biomechanics, Kuchumov A.G. presented solutions to the current problems in cardiovascular surgery using computational fluid dynamics methods [15,16]. This work is an excellent example of collaboration between specialists in the field of mathematical modeling, numerical methods and medicine to solve the pressing problems in biophysics.…”