The Effect of the changing cover thickness on the stability of cellars

Abstract

The stability of natural and man-made cavities is a very important topic nowadays especially if it is located under new construction areas. There are a lot of residential areas in Budapest and other cities of Europe such as Rome, Paris, and Cracow with stability problems because of cavities. For stability calculations, the geometry of the cavity, strength properties of the rock mass and joints are needed as input parameters, which can be obtained by field and laboratory tests. The FEM software is effective for stability calculations and with them; it is not so difficult to perform parametric analysis. This paper is focusing on the effect of the thickness of the cellar cover on their stability. The investigation site is in Budapest, Hungary, where there are several cellars cut into porous limestone. These cellars are more than 100 years old and nowadays cause difficulties for the building improvements. The geometrical parameters of the cellars and strength properties were measured. The cover of the studied cellar is around 6.0 m, but other cellars in the area have various cover thicknesses from 2.0 to 9.0 m. Therefore, the paper studied the effect of the cover on the stability to find the relation between the depth and the cellar stability. The modelling has been done by Rocscience software (RS2), using a real cross-section that crosses six branches of the cellar system.