The Effect of Secondary‐Phase Fraction on the Deformation of Olivine + Ferropericlase Aggregates: 1. Microstructural Evolution

Abstract

To study the microstructural evolution of polymineralic rocks, we performed deformation experiments on two‐phase aggregates of olivine (Ol) + ferropericlase (Per) with periclase fractions (fPer) between 0.1 and 0.8. Additionally, single‐phase samples of both Ol and Per were deformed under the same experimental conditions to facilitate comparison of the microstructures in two‐phase and single‐phase materials. Each sample was deformed in torsion at T = 1523 K, P = 300 MPa at a constant strain rate up to a final shear strain of γ = 6 to 7. Microstructural developments, analyzed via electron backscatter diffraction (EBSD), indicate differences in both grain size and crystalline texture between single‐ and two‐phase samples. During deformation, grain size approximately doubled in our single‐phase samples of Ol and Per but remained unchanged or decreased in two‐phase samples. Zener‐pinning relationships fit to the mean grain sizes in each phase for samples with 0.1 ≤ fPer ≤ 0.5 and for those with 0.8 ≥ fPer ≥ 0.5 demonstrate that the grain size of the primary phase is controlled by phase‐boundary pinning. Crystallographic preferred orientations, determined for both phases from EBSD data, are significantly weaker in the two‐phase materials than in the single‐phase materials.

The Effect of Secondary‐Phase Fraction on the Deformation of Olivine + Ferropericlase Aggregates: 2. Mechanical Behavior

“…All data used in this study are available from the University of Minnesota Digital Conservancy (https://doi. org/10.13020/k0p0-5047, Wiesman et al, 2023).…”