The effect of dissolved oxygen on the oxidation of an austenitic steel in supercritical water

Xu, Yang; Xu, Guohai; Che, Chao; Zhu, Zhongliang; Chen, Xinzhong; Qian, Linfeng; Gong, Qihuang; Zhang, Naiqiang

doi:10.1080/09603409.2021.2012958

Cited by 2 publications

(1 citation statement)

References 36 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…When the salinity is higher than 3.5 wt%, the dissolved oxygen decreases as the Cl − concentration increases. The concentration of dissolved oxygen is an important factor affecting corrosion [34]. When the Cl − concentration is higher than 3.5 wt%, the corrosion rate is affected by the oxygen concentration together with the conductivity.…”

Section: Effect Of CL − Concentration On Corrosionmentioning

confidence: 99%

Effect of Doping Trace Rare Earth Elements on Corrosion Behavior of EH36 Offshore Platform Steel

Zheng,

Liu,

Liu

et al. 2024

Coatings

View full text Add to dashboard Cite

EH36 offshore platform steel, La (0.0031%) steel, Ce (0.0027%) steel, and Pr (0.0001%) steel were selected as the research objects. The corrosion of four groups of steel was simulated by immersion experiments. In the presence of Cl− the effect of rare earth elements (La, Ce, Pr) on corrosion was investigated by the weight loss method. The morphology of the corrosion products and the apparent morphology after the removal of the corrosion products were observed by scanning electron microscopy (SEM); the main components of four steel corrosion products were analyzed by X-ray diffraction (XRD). The electrochemical behavior and the influence of temperature and Cl− concentration on the corrosion of the four kinds of steel were analyzed by an electrochemical polarization curve and Nyquist diagram. The results showed that the addition of trace rare earth elements, La, Ce, and Pr, to EH36 offshore platform steel can reduce the corrosion rate and the corrosion current density (Icorr), and increase the charge transfer resistance during the corrosion process. The Icorr of La steel, Ce steel, and Pr steel is 6.59 × 10−5 A·cm−2, 7.57 × 10−5 A·cm−2, and 9.53 × 10−5 A·cm−2, respectively, which is lower than that of EH36 steel (Icorr = 1.82 × 10−4 A·cm−2). The influence of Cl− concentration and temperature on the four steels showed the same trend; that is, with the increase in Cl− concentration, the corrosion rate first rises and then slows down, and with the increase in temperature, the corrosion rate gradually accelerates. Rare earth elements promote the production of more α-FeOOH in the rust layer, and the compactness of this product plays a certain role in protecting the steel matrix. The addition of trace rare earth elements, La, Ce, and Pr (less than 0.004%), improves the corrosion resistance of EH36 steel.

show abstract

Section: Effect Of CL − Concentration On Corrosionmentioning

confidence: 99%