The Effect of Coating Process and Additives on EVA Coated Tyvek^® for Gas Sterilizable Medical Packaging Applications

Abstract

Tyvek®, as an ethylene oxide (EtO) gas sterile medical packaging material with a high‐gas permeation and serving as an excellent microbial barrier, must be coated with heat‐sealable adhesives to thermally seal various plastic packaging trays or films. Tyvek® sheet coated with heat‐sealable adhesives must have both porous structure and good sealing strength to various substrates. In this study, an acid pre‐coating method was distinctively introduced to minimize reactions between the blowing agent and acid during mixing, to resultantly generate ethyl vinyl acetate (EVA) layers with porous structure on Tyvek® sheets. To determine the feasibility of applying the as‐prepared coated Tyvek® as a sterile medical packaging material, we investigated the properties of the coating solution and coated Tyvek® as a function of process and additive composition. Finally, EtO gas sterilization tests were performed, and property changes in the coated Tyvek® were investigated. Properties of the coated Tyvek® were strongly dependent on the pre‐coating process and the composition of various additives. Pre‐coating with citric acid led to less of a reaction between citric acid and ammonium carbonate as a blowing agent during mixing and resulted in both good seal strength and air permeation for the coated Tyvek® sheets. The coated Tyvek® sheets, composed of a water‐based EVA emulsion solution with various additives, were not affected by the EtO sterilization process and yielded good resistance to humidity, EtO gas and vacuum cycles. The coated Tyvek® sheets prepared by applying an acid pre‐coating may be a promising candidate for gas sterilizable medical device packaging materials. Copyright © 2017 John Wiley & Sons, Ltd.

Effect of porous zeolite on temperature-dependent physical properties of polypropylene/octadecane (PP/OD) composite films

“…The quality of agricultural products strongly depends on atmospheric composi-tions, which are affected by variations of respiration rates, transpiration during storage, and distribution environments [1,3,5]. Thus, sterilization of medical devices is required to maintain their aseptic environments until they are ready to use, and their packaging materials must possess the ability to survive a sterilization process [9]. Therefore, chemical and physical properties of the packaging materials should be adjusted to provide optimal gas permeability properties for practical applications in various fields.…”

Application of Physical Gas Absorbers in Manipulating the CO2 Pressure of Kimchi Package

“…First, CO 2 absorption/release behavior under the condition of relatively free gaseous access was measured at three temperatures (0, 10 and 20 °C) using microporous Tyvek film sachets (4.5 × 4.5 cm on both sides) containing 3.0 g of the absorber. Use of Tyvek film was because of its high gas transmission allowing good microbial barrier in packaging applications (Kwon, Kim, Lee, Seo, & Lee, ). The physical CO 2 absorbers, activated carbon (A) and zeolite (Z) were used alone or in combination in the sealed sachet.…”

Biopolymers for Biomedical and Pharmaceutical Applications: Recent Advances and Overview of Alginate Electrospinning

“…Figure 1 summarizes some of the properties desired in common packaging materials. Detailed properties have been discussed in some excellent review articles, so we won’t be going into more detail [1,2,7,8,9]. In this direction, public awareness is rapidly growing and attracting greater attention to ecology, as well as the use of natural substances for a range of applications from automotive to biomedical [10,11,12,13,14,15,16].…”

“…Packaging in medical and biomedical engineering is defined as a technique that enables the closure of a pharmaceutical product from its production to its end use [24]. The role of pharmaceutical packaging is to provide life-saving drugs, surgical devices, nutraceuticals, pills, powders and liquids, to name a few [7,25]. Pharmaceutical packaging influences the isolation and ensures the safety, identity and convenience of using the drug.…”