The creep of alloy 617 at 700 °C: Material properties, measurement of strain and comparison between finite element analysis and digital image correlation

Narayanan, Aditya; Dubey, Kajal; Davies, Catrin M.; Dear, John P.

doi:10.1016/j.ijsolstr.2017.08.021

Cited by 15 publications

(1 citation statement)

References 17 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…15,16 Literature presents few examples of application of DIC to creep deformation measurement. Narayanan et al 17 measured creep strain at 700°C of notched Inconel 617 samples using DIC together with linear variable differential transducers (LVDTs). Similarly, creep fracture properties of alloy IN800 was measured from DIC-obtained deformation maps together with finite-element methods (FEMs).…”

Section: Introductionmentioning

confidence: 99%

Measurement of creep deformation of ex-service 12% Cr steel using digital image correlation

Rooyen

Becker

Westraadt

et al. 2020

The Journal of Strain Analysis for Engineering Design

View full text Add to dashboard Cite

The effective operation of ageing coal-fired power plants requires routine damage assessment of critical component materials throughout their service history. Traditional post-exposure mechanical testing typically requires large amounts of material for each testing condition. This study introduces an accelerated (high stress and temperature) creep testing technique that employs digital image correlation for strain measurement over a non-uniform temperature field generated by a thermomechanical tester. When applied to different ex-service (exposed to service conditions within a power plant) 12% Cr piping steels, multiple accelerated creep curves at temperatures ranging from 550°C to 600°C are measured from a single specimen for each material condition. Higher creep damage in the steel due to longer service exposure and higher void densities is revealed by shorter rupture times, faster creep rates and tertiary-dominated creep curves when compared to the lower creep damage state. Microstructural study via quantitative electron microscopy confirms the dislocation creep-driven growth of subgrains in the specimen gauge regions relative to the grips. Larger subgrains and a weakening of precipitate distributions for the high damage material were also noted. Digital image correlation–measured strains are in good agreement with traditional techniques of creep testing with standard extensometry. On a comparative basis, the technique is shown to be a plausible form of damage assessment of 12% Cr piping steels with varying levels of service exposure and serve as a suitable mechanical complement to the traditional void replica methodology.

show abstract

Section: Introductionmentioning

confidence: 99%