The Attachment of Carbon Nanotubes to Atomic Force Microscopy Tips Using the Pick-Up Method

Abstract

In the last 30 years research has shown that the resolution and reproducibility of data acquired using the atomic force microscope (AFM) can be improved through the development of new imaging modes or by modifying the AFM tip. One method that has been explored since the 1990s is to attach carbon nanotubes (CNT) to AFM tips. CNTs possess a small diameter, high aspect ratio, high strength and demonstrate a high degree of wear resistance. While early indications suggested the widespread use of these types of probes would be routine this has not been the case. A number of methods for CNT attachment have been proposed and explored including chemical vapor deposition (CVD), dielectrophoresis and manual attachment inside a scanning electron microscope (SEM). One of the earliest techniques developed is known as the pick-up method and involves adhering CNTs to AFM tips by simply scanning the AFM tip, in tapping mode, across a CNT-covered surface until a CNT attaches to the AFM tip. In this work we will further investigate how, for example, high force tapping mode imaging can improve the stability and success rate of the pick-up method. We will also discuss methods to determine CNT attachment to AFM probes including changes in AFM image resolution, amplitude versus distance curves and SEM imaging. We demonstrate that the pick-up method can be applied to a range of AFM probes, including contact mode probes with relatively soft spring constants (0.28 N/m). Finally, we demonstrate that the pick-up method can be used to attach CNTs to two AFM tips simultaneously. This is significant as it demonstrates the techniques potential for attaching CNTs to multiple AFM tips which could have applications in AFM-based data storage, devices such as the Snomipede, or making CNT-AFM tips more commercially viable.

Carbon nanotube‐polybutadiene‐poly(ethylene oxide)‐based composite fibers: Role of cryogenic treatment on intrinsic properties

“…Nano‐sized electronic devices, such as nanotube field‐effect transistors (NTFETs), have also been achieved 5 . Moreover, because of their small size, CNTs can improve the resolution in scanning tunneling and atomic force microscopes, as well as other scanning probe instruments 6–9 …”

Advancement in fabrication of carbon nanotube tip for atomic force microscope using multi-axis nanomanipulator in scanning electron microscope

“…Since, individual CNT cannot be observed with an optical microscope of limited resolution, the above-mentioned methods soon encountered difficulties in accurate manipulation. Another method is to grow CNT directly on AFM tip via chemical vapor deposition [2,15,16]. This method, however, has limitations in the length control of the grown CNT.…”

Random telegraphic noise and 1/f noise from CNT emitters in Tuning fork-based scanning tunneling microscopy

“…The CNT tip has 1-dimensional (1D) structure, ultrathin diameter, and high surface to volume ratio. Due to these properties, the use of CNT tip as a probe in Scanning Probe Microscopy (SPM) to detect tunneling current (in scanning tunneling microscopy) and interaction force (in atomic force microscopy) is on the rise, and it is possible to achieve atomic resolution easily and address their potential to improve lateral resolution [8][9][10][11].…”