The 773K isothermal section of the Nd–Fe–Sb ternary system

A Thermodynamic Modeling of the Fe–Nd–Sb System

“…In Fig. 6, all 20 three-phase regions are in good agreement with the experimental data in the entire composition range from Zeng et al 39) In Fig. 7, the calculated phase equilibria of the thermodynamic section at 870 K using the present thermodynamic parameters are in good agreement with the experimental data in the composition range of ³33100 at% Sb from Sologub and Salamakha.…”

“…The 773 K isothermal section in the whole composition range was determined by Zeng et al 39) Five ternary compounds (e.g.¸1, ³NdFe 2.5 Sb 2 (i.e.¸2),¸4,¸5,¸6), 20 three-phase regions, and 36 two-phase regions were confirmed in this isothermal section in the study of Zeng et al…”

“…The thermodynamic parameters of the ternary FeNdSb system were optimized on the basis of experimental data available in the literature. 37,39,40) All the calculated phase diagram and the calculated thermochemical data, which will be presented in Section 5, were reproduced from the thermodynamic evaluated parameters.…”

Synthesis, structure, magnetic and transport properties of LnFeSb3 (Ln = Pr, Nd, Sm, Gd, and Tb) – tuning of anisotropic long-range magnetic order as a function of Ln

“…13 While the title compounds were grown using an Sb flux, the a-PrFeSb 3 and a-NdFeSb 3 phases were originally prepared via arc-melting. [22][23][24] These results also suggest that the alpha and beta polymorphs are dependent on the synthetic methods, and the transition metal determines the structural adoption.…”

The isothermal section of the Dy–Fe–Sb ternary system at 773K

“…The phase relationships of the RE-Fe-Sb (RE = La, Pr, Nd, Ho, Gd, Er and Yb) ternary systems were reported previously [6][7][8][9][10]. Up to the present, the phase diagram of the Dy-Fe-Sb ternary system has not been reported.…”