Testing Small CPAS Parachutes Using HIVAS

Abstract

The High Velocity Airflow System (HIVAS) facility at the Naval Air Warfare Center (NAWC) at China Lake was successfully used as an alternative to flight test to determine parachute drag performance of two small Capsule Parachute Assembly System (CPAS) canopies. A similar parachute with known performance was also tested as a control. Realtime computations of drag coefficient were unrealistically low. This is because HIVAS produces a non-uniform flow which rapidly decays from a high central core flow. Additional calibration runs were performed to characterize this flow assuming radial symmetry from the centerline. The flow field was used to post-process effective flow velocities at each throttle setting and parachute diameter using the definition of the momentum flux factor. Because one parachute had significant oscillations, additional calculations were required to estimate the projected flow at off-axis angles. The resulting drag data from HIVAS compared favorably to previously estimated parachute performance based on scaled data from analogous CPAS parachutes. The data will improve drag area distributions in the next version of the CPAS Model Memo.

Reconstruction of Orion EDU Parachute Inflation Loads

“…The FBCP and Pilot parameters are currently assumed to have inflation parameters identical to those of the Drogue reconstructed first stage, but with smaller inflated drag areas. 14…”

Summary of CPAS EDU Testing Analysis Results

“…The Analysis team published eleven papers in 2013 covering EDU analysis and testing. These papers discuss modeling improvements, 6,7,8,9,10 and contain test reconstruction updates 11,12,13 and summaries of the individual vehicle test techniques 14,15,16 . A timeline of all three test series and the associated test vehicles is depicted in Fig.…”