Testing of pile to pile-cap connection on steel pipe piles subject to axial and uplift loads

Abstract

Earthquakes have occurred globally over the last two decades, which have resulted in an increased expectation of acceptable performance for bridge structures during seismic events. Many research projects have been performed to assess the degree of structural damage especially upper structure of bridges. However, a few researches are available on the pile foundation systems and their response to earthquakes especially for a pile to pile-cap connection. When a pile-cap is loaded, moment and axial loads are transferred to the pile through the pile to pile-cap connection. There is uncertainly with regards the portion of the loads the connection experiences due to the inability to effectively monitor the forces the connection experiences during loadings. In order to investigate behavior of the pile to pile-cap connection for steel pipe piles subject to axial and uplift loads, full scale tests were conducted, and their key factors were considered from test results.

Experiment Investigation on Stress Characteristics of Grouting Microsteel Pipe Piles with Cement‐Soil Wall

“…Doherty et al summarised a field trial undertaken to validate the use of FBG strain sensing arrays in driven microsteel pipe pile applications [5]. Nam et al explored the bearing mechanism of conical steel pipe piles in sand and explored the mechanical characteristics and bearing mechanism of different pile heads on microsteel pipe piles in sand [6]. In recent years, microsteel pipe piles have widely been used in slope support, and few studies have been applied to foundation pit support.…”