Ternary Alloys AuPdPt Catalysts Supported on the Tungsten Carbide for Methanol Electrooxidation

Abstract

Direct methanol fuel cell (DMFCs) is one of the best positioned toward widespread commercialization and the most viable alternative to lithium-ion batteries for portable applications. A major drawback of this technology is in large part related to the dependence on Pt-based electrocatalysts for methanol oxidation reaction (MOR) at the anode. To address this issue, low-Pt electrocatalysts are desired for keeping high performance of MOR. In this abstract, trimetallic AuPdPt nanocomposites supported on the tungsten carbide (WC) was prepared through two-step method, i) intermittent microwave heating method (IMH) and ii) direct chemical reduction method. Trimetallic AuPdPt nanoparticles are dispersed well on the nanostructured WC, confirmed by scanning electron microscopy (SEM), energy X-ray diffraction spectroscopy (EDX), and transmission electron microscopy (TEM). The electrocatalytical performance of the as-synthesized nanocomposite for MOR was tested using cyclic voltammetry and chronopotentiometry in alkaline media. The results revealed that the WC enhanced trimetallic AuPdPt nanocomposites has better performance of MOR and stability than that of commercial Pt/C catalyst. Alloying strategy and the introduction of WC support are good choices for preparation of MOR electrocatalysts with low loading of Pt.