Technical Design Considerations About the SINBAD-ARES Linac

Marchetti

2019

SINBAD (Short and INnovative Bunches and Accelerators at DESY) facility will host multiple experiments relating to ultra-short high brightness beams and novel experiments with ultra-high gradient. ARES (Accelerator Research Experiment at SINBAD) Linac is an S-band photo injector to produce such electron bunches at around 100 MeV. The Linac will be commissioned in stages with the first stage corresponding to gun commissioning. In this paper, we present studies about the scheme adopted for the alignment of focusing solenoid for the ARES gun. The method is bench marked using ASTRA simulations. Moreover the effect of misalignment of the solenoid on the emittance of space charge dominated scheme and its compensation is also discussed.

Study for the alignment of focusing solenoid of ares rf gun and effect of misalignment of solenoid on emittance of space charge dominated electron beam

Yamin

Marchetti

2019

Development of a silicon strip detector for novel accelerators at SINBAD

Jaster-Merz

Burkart

et al. 2019

At the SINBAD facility (DESY Hamburg), novel particle acceleration techniques like dielectric laser acceleration (DLA) structures will be tested using the ARES linac. Due to the small size of these structures, the accelerated electron beams only have a very low (sub-pC) charge. To determine the energy distribution of these beams, a silicon strip detector for the ARES linac spectrometer is currently under development. This detector fulfils the requirements of high spatial resolution for low charge density beams. The detector consists of two 1 cm × 1 cm silicon strip sensors and readout components. The design of the detector, its components and an estimate of its behaviour for a specific electron beam distribution are presented and discussed.

Design considerations for permanent magnetic quadrupole triplet for matching into laser driven wake field acceleration experiment at SINBAD

Yamin

Dorda

et al. 2020

The ARES (Accelerator Research experiment at SINBAD) Linac at SINBAD (Short and INnovative Bunches and Accelerators at DESY) facility at DESY aims to produce high brightness ultrashort electron bunches (sub fs to few fs) at around 100 MeV, suitable for injection into novel accelerators e.g. dielectric Laser acceleration (DLA) and Laser Driven Wakefield acceleration (LWFA). The external injection experiment planned at ARES aims for stable LWFA by combining the reproducible conventional RF-based accelerator technology, with high-power plasma wakefield dynamics. The LWFA experiment demands Twiss parameter β to be of the order of few mm, in order to avoid emittance growth because of high accelerating gradient in the plasma. The ARES Linac is capable of producing ultra-short bunches at around 100-150 MeV, so the effect of space charge is significantly high. To match such a space charge dominated beam, strong transverse focusing is required. A Permanent Magnetic Quadrupole (PMQ) triplet is one promising focusing strategy. In this paper, we report the technical design constraints and findings for stable settings for PMQ triplet to match the requirements of the electron beam properties and study of phase spaces for final focus into LWFA experiment.