Synthesis and structural, electrochromic characterization of pulsed laser deposited vanadium oxide thin films

Abstract

Preparation of α -Al 2 O 3 thin films by electron cyclotron resonance plasma-assisted pulsed laser deposition and heat annealing

Tribological Properties of Reactive Magnetron Sputtered V2O5 and VN–V2O5 Coatings

“…Investigations on amorphous and polycrystalline V 2 O 5 coatings deposited by dc and bipolar-pulsed dc magnetron sputtering showed the role of deposition method as well as substrate temperature on structure, preferential orientation of the V 2 O 5 phase and mechanical properties [11]. In the literature, several investigations on structural and optical properties of V 2 O 5 films prepared by various deposition techniques and under varying deposition conditions can be found [10][11][12][13][14][15][16][17][18]. However, with the exception of a few investigations [5,19], the tribological properties of V 2 O 5 films, particularly at elevated temperatures, have not yet been reported in detail.…”

Effect of total gas and oxygen partial pressure during deposition on the properties of sputtered V2O5 thin films

“…Among the oxides, vanadium pentoxide seems to be a promising candidate because of its layered structure, a good discharge capacity and a high energy density. Numerous techniques have been used to prepare V 2 O 5 thin films, as for example vacuum evaporation [8], sputtering [9][10][11], pulsed laser deposition [12], chemical vapour deposition [13] and sol-gel processes [14,15].…”

Li+-intercalation electrochemical/electrochromic properties of vanadium pentoxide films by sol electrophoretic deposition

“…The high-energy techniques include thermal evaporation [9], RF magnetron sputtering [10][11][12], dc magnetron sputtering [13] and pulsed laser deposition [14]. The low-energy techniques, or the chemical techniques include electrochemical deposition (ECD) [15], chemical vapor deposition [16] and sol-gel deposition such as dip-coating and spin-coating [17].…”