Synthesis and Electrical Resistance Property of Vanadium Oxide Thin Films by DC Magnetron Sputtering

Abstract

Thin films of vanadium oxide were synthesized by DC magnetron sputtering on a glass slide. Process parameters including temperature, argon and oxygen ratio (Ar:O2) and base pressure were investigated. It was found that the control of sputtering base pressure is very important in realizing the pure VO2 (M) thin films. These thin films have grown at low base pressure of 5x10-6 mbar. The results of the valence electron analysis show the outstanding phase of VO2 and a small amount of V2O5 and V2O3 phases. The hysteresis loop of electrical resistance property of the VO2 thin films illustrated the quality of film, which is related to metal-insulator transition phase (MIT) at the transition temperature (Tc) of approximately 63°C. The sample was tested for its electrical properties by a four-probe setup with a temperature controller during heating and cooling cycles.

Low-Temperature Synthesis of Vanadium Dioxide Thin Films by Sol-Gel Dip Coating Method

“…For commercial applications, such as smart window coating, glass is the desirable substrate. e soda lime glass is the most common and cheapest one [14,15]. Considering that, for wet-chemical processes, the crystalline VO 2 phase is typically formed by a high-temperature treatment process.…”