Synthesis and characterization of ternary chitosan–TiO2–ZnO over graphene for photocatalytic degradation of tetracycline from pharmaceutical wastewater

Abstract

Various nanocomposites of TiO2–ZnO, TiO2–ZnO/CS, and TiO2–ZnO/CS–Gr with different molar ratios were synthesized by sol–gel and ultrasound-assisted methods and utilized under UV irradiation to enhance the photocatalytic degradation of tetracycline. Characterization of prepared materials were carried out by XRD, FT-IR, FE-SEM, EDX and BET techniques. The TiO2–ZnO with the 1:1 molar ratio supported with 1:2 weight ratio CS–Gr (T1‒Z1/CS1‒Gr2 sample) appeared as the most effective material at the optimized operational conditions including the tetracycline concentration of 20 mg/L, pH = 4, catalyst dosage of 0.5 g/L, and 3 h of irradiation time. As expected, the graphene had a significant effect in improving degradation results. The detailed performances of the T1‒Z1/CS1‒Gr2 were compared with ternary nanocomposites from EDX and BET results as well as from the degradation viewpoint. This novel photocatalyst can be effective in actual pharmaceutical wastewater treatment considering the applied operational parameters.

Transparent glass-nanocomposites possessing piezoelectric ZnO/Zn2SiO4 nanocrystallites for piezocatalytic dye degradation

“…makes the water sources polluted. 3 Organic colored dyes are commonly used in various industries such as textile, cosmetic, leather, and ink industries. 4 Annually, more than 0.7 million tons of dyes colored organic dyes are produced worldwide.…”

Mechanistic insight into the photocatalytic degradation of organic pollutants and electrochemical behavior of modified MWCNTs/Cu–Co3O4 nanocomposites

“…16 Over the past decades, inexpensive and environmentally friendly, relatively reproducible, and more stable large-scale synthetic routes have been sought. There are several approaches available concerning the physical and chemical processes of nano metal oxides including the one-step solid-state reaction at room temperature, 17 electrochemical method, 18 sonochemical method, 19 co-precipitation method, 20 ultrasonic spray pyrolysis, 21 thermal decomposition, 22 sol–gel technique, 23,24 chemical vapor deposition (CVD), 25 laser ablation, 26 arc discharge, 27 ball milling, 28 hydrothermal synthesis, 29,30 gel-combustion synthesis 31 and the use of organic complexes. 32–35 These methods, however, are either time-consuming or require costly instruments.…”

One-Step Coating of a ZnS Nanoparticle/MoS2 Nanosheet Composite on Supported ZnO Nanorods as Anodes for Photoelectrochemical Water Splitting

“…To this end, an n-type semiconductor ZnO has been widely used as an OER photoanode due to its favorable band structure, which is close to the OER potential barrier of 1.23 V versus normal hydrogen electrode (NHE), thus preventing the impractical OER overpotential. − ZnO is also easy to synthesize via low-cost fabrication methods, including hydrothermal, chemical bath deposition, electrodeposition, and sol–gel methods . However, ZnO can only work optimally in the UV region owing to its wide band gap of 3.37 eV (equivalent to optical absorption at a wavelength of 368 nm) .…”