Switchable electro-optic diffractive lens with high efficiency for ophthalmic applications

Abstract

Presbyopia is an age-related loss of accommodation of the human eye that manifests itself as inability to shift focus from distant to near objects. Assuming no refractive error, presbyopes have clear vision of distant objects; they require reading glasses for viewing near objects. Area-divided bifocal lenses are one example of a treatment for this problem. However, the field of view is limited in such eyeglasses, requiring the user to gaze down to accomplish near-vision tasks and in some cases causing dizziness and discomfort. Here, we report on previously undescribed switchable, flat, liquid-crystal diffractive lenses that can adaptively change their focusing power. The operation of these spectacle lenses is based on electrical control of the refractive index of a 5-m-thick layer of nematic liquid crystal using a circular array of photolithographically defined transparent electrodes. It operates with high transmission, low voltage (<2 V rms), fast response (<1 sec), diffraction efficiency > 90%, small aberrations, and a power-failure-safe configuration. These results represent significant advance in stateof-the-art liquid-crystal diffractive lenses for vision care and other applications. They have the potential of revolutionizing the field of presbyopia correction when combined with automatic adjustable focusing power.ophthalmic lens ͉ switchable lens ͉ vision correction T he use of nematic liquid crystals to implement switchable lenses has been proposed previously but had limited success for ophthalmic applications (1). Hybrid liquid-crystal refractive lenses incorporating convex and concave substrates have been demonstrated (2, 3). However, the large thickness of the liquidcrystal layers (Ͼ400 m) make their response and recovery times long and their transmission low because of optical scattering. To reduce the thickness of the active layer, surface relief Fresnel lens substrates have been proposed (4). However, in this geometry the lens is optically active in the electrically off-state, which is not desirable for ophthalmic applications where a loss of electrical power could suddenly result in near-vision correction during a critical distance vision task such as driving. In other approaches, thin uniform layers of liquid crystal were used, and refractive lenses were produced by the use of discrete electrodes (5), continuous highly resistive electrodes (6), or spatially distributed electric fields (microlenses) (7). However, in these lenses either the range of focal length or their small diameter made them unsuitable for ophthalmic applications. We employ a photolithographically patterned thin diffractive lens with large aperture, fast response time, and a power-failure-safe configuration to overcome these limitations. Although high-efficiency liquid-crystal-based diffractive devices have been demonstrated for beam-steering (8, 9), less effort was given to the development of switchable diffractive lenses. The diffraction efficiencies of the lenses achieved for imaging (10-15) and other applications (16, 17) we...

Anisotropic shift of surface plasmon resonance of gold nanoparticles doped in nematic liquid crystal

“…The future work on this topic involves the analysis of interaction of LC with the other nano-materials which would lead to the improved display applications. Moreover, the control of alignment of LC by using various sizes GNPs would allow the development of new non-display LC devices, including tunable lenses [32][33][34][35], optical sensors, lasers and other photonic devices.…”

Polymeric-lens-embedded 2D/3D switchable display with dramatically reduced crosstalk

“…For example, for an LC lens with a 30 μm cell gap, the response time is about 1 s [6]. To reduce response time, several methods have been proposed, such as using a high birefringence LC to reduce cell gap [7], a Fresnel lens instead of a conventional LC lens [8][9][10], a polymer network LC [11], and by applying overdrive and undershoot voltages [12,13].…”

Programmable diffractive lens for ophthalmic application

“…[6][7][8][9] They usually have a diffractive design, either displayed on a pixelated device, 5,8 or on a device consisting of other arrays of cells (e.g., with circular symmetry in Ref. 9). A commercially available eyewear system targets presbyopia by means of a progressive-addition lens that contains a liquid crystal device layer.…”

“…Some liquid crystal devices have been already proposed for their use as spectacle lenses and some prototypes can be found in the literature. [6][7][8][9] They usually have a diffractive design, either displayed on a pixelated device, 5,8 or on a device consisting of other arrays of cells (e.g., with circular symmetry in Ref. 9).…”