Sustained oxygen release of hydrogen peroxide-acrylic resin inclusion complex for aquaculture

Abstract

To overcome the lack of dissolved oxygen in high-density aquaculture water, a hydrogen peroxide-acrylic resin inclusion complex with sustained oxygen releasing effect was designed and prepared. The resin was synthesized by emulsion polymerization of acrylic acid, methyl methacrylate and butyl acrylate in a mass ratio of 2: 3: 5, and neutralized with sodium hydroxide solution by 50%. The resin solution was mixed in a mixture of urea and 30% hydrogen peroxide solution (CO(NH2)2: H2O2, 1: 1, mol: mol), and dried at 40 °C for 4 h to obtain the hydrogen peroxide-acrylic resin inclusion complex. The product with 4.0% resin by mass of hydrogen oxygen solution, could release oxygen for 92 h in pond water. After optimization by adding a small amount of NaCl, Na2SO4, and EDTA, it was mixed with calcium carbonate and magnesium stearate in a mass ratio of 5: 4: 0.9, and pressed into tablets (1.2 × 0.6 cm, 0.99 g). One tablet in 50 L simulated micro ecosystem aquaculture water with 20 of Carassius auratus fish could release oxygen for 116 h and brought fish with 83.3% of survival rate higher than 51.7 and 70.0% of blank and sodium percarbonate groups.

Screening of Microplastics in Aquaculture Systems (Fish, Mussel, and Water Samples) by FTIR, Scanning Electron Microscopy–Energy Dispersive Spectroscopy and Micro-Raman Spectroscopies

“…Furthermore, PBMA and PVB polymers act as toughening agents to the brittle phenolic resins applied as coatings for metals [58,59]. Recently, to overcome the lack of dissolved oxygen in high-density aquaculture water, a hydrogen peroxide acrylic resin inclusion complex with a sustained oxygen-releasing effect could be synthesized by emulsion polymerization of acrylic acid, methyl methacrylate, and butyl acrylate [60]. As a result, PVB and PBMA ingestion could also be attributed to such applications.…”