Sustainable and mechanically robust epoxy resins derived from chitosan and tung oil with proton conductivity

Abstract

The development of sustainable and functional epoxy resins from renewable biomass is gaining increasing attention. Herein, renewable and mechanically strong epoxy resins from chitosan and tung oil that possess proton conduction properties are developed. Firstly, tung oil‐based epoxy monomers and chitosan based chain transfer agent were prepared. Then, a “grafting from” reversible addition‐fragmentation chain transfer (RAFT) polymerization was carried out on chitosan using epoxy monomers toward elastic graft copolymer, which combined rigid backbone and flexible side chains in one macromolecule. After being cured with citric acid (catalyst‐free), a biomass‐based epoxy resins with dual network structure can be obtained. The thermal and mechanical properties of these epoxy resins could be tuned through controlling the content of cross‐linkers. Moreover, the chitosan bearing abundant amino groups not only enhanced strength of the epoxy resins, but also endowed them with proton conductivity. Overall, the epoxy resins exhibited high tensile strength and comparable proton conduction, which provides a new paradigm to design green functional materials for potential applications.

Interfacial tailoring of basalt fiber/epoxy composites by metal–organic framework based oil containers for promoting its mechanical and tribological properties

“…[1][2][3] Today, EP materials are widely used in automotive, aviation, rail transportation, and construction. [4][5][6][7] However, neat EP suffers a lot from its brittleness, fatigue resistance, and poor tribology behavior. [8][9][10] Therefore, various enhancers, such as carbon fiber, glass fiber, and natural fiber have been employed to overcome these shortcomings.…”

Valorisation of Chitosan Natural Building Block as a Primary Strategy for the Development of Sustainable Fully Bio-Based Epoxy Resins

“…Nepomuceno et al [ 22 ] developed thermoset resins foreseeing potential applications such as curative bio-composites using epoxidized soybean oil cured with salicylic acid and chitosan in different mass percentages: 1, 3, and 5 wt.%. Furthermore, through RAFT polymerization of a chitosan derivative and epoxidized tung oil, and using citric acid as a curing agent, Song et al developed materials for packaging applications [ 23 ].…”