Surface Textured Polymer Fibers for Microfluidics

Abstract

Cataloged from PDF version of article.This article introduces surface textured polymer fibers as a new platform for the fabrication of affordable microfluidic devices. Fibers are produced tens of meters-long at a time and comprise 20 continuous and ordered channels (equilateral triangle grooves with side lengths as small as 30 micrometers) on their surfaces. Extreme anisotropic spreading behavior due to capillary action along the grooves of fibers is observed after surface modification with polydopamine (PDA). These flexible fibers can be fixed on any surface - independent of its material and shape - to form three-dimensional arrays, which spontaneously spread liquid on predefined paths without the need for external pumps or actuators. Surface textured fibers offer high-throughput fabrication of complex open microfluidic channel geometries, which is challenging to achieve using current photolithography-based techniques. Several microfluidic systems are designed and prepared on either planar or 3D surfaces to demonstrate outstanding capability of the fiber arrays in control of fluid flow in both vertical and lateral directions. Surface textured fibers are well suited to the fabrication of flexible, robust, lightweight, and affordable microfluidic devices, which expand the role of microfluidics in a scope of fields including drug discovery, medical diagnostics, and monitoring food and water quality. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Flexible and stretchable nanowire-coated fibers for optoelectronic probing of spinal cord circuits

“…S2), the polymers PC and COC are compatible with the thermal drawing process. Consequently, the geometry of the device can be easily altered to fit the application ( 28 ). The difference between the refractive indices of PC and PDMS is 0.18.…”

Controlled Sub‐Micrometer Hierarchical Textures Engineered in Polymeric Fibers and Microchannels via Thermal Drawing

“…Any texture can be simply fabricated at the preform level (sub-millimeter scale), or imprinted onto a die for extrusion, but during the fiber pulling step a reflow of the desired pattern driven by surface tension (Laplace pressure) occurs, [41,42] resulting in the distortion of the initial shape at the fiber level below a certain feature size. Earlier work [43,44] has achieved the functionalization of thermally drawn fibers that integrated textures but with large sizes, typically around 30 micrometer, using polyetherimide (PEI), a thermoplastic with a very high mechanical strength that allows for a processing at high viscosity that can limit reflow at these dimensions. For many applications in optics, optoelectronics, microfluidics, biology or advanced textiles however, it is necessary to have smaller-sub-micrometer-patterns on the surface and within a variety of polymers, which display much weaker mechanical strengths such as polycarbonate (PC), poly(methyl methacrylate) (PMMA) or even soft elastomers such as the widely used poly(dimethylsiloxane) (PDMS).…”

Synthetic stimuli-responsive ‘smart’ fibers

“…These precisely fabricated biodegradable arrays can be used for endothelial cell growth and are an exciting precursor to a functional microvascular network [19]. Polymer fibers for microfluidic devices is also not a new concept but recently Yildirim et al [20 ] have shown that microfluidic devices can be assembled from drawn polymer fiber, with the microfluidic-channels incorporated into the individual fiber [20 ]. Microfluidic devices fabricated by this method have the potential to be used in high throughput, low cost, point of care analysis, which can be used for early stage detection of diseases in the field [20 ].…”