“…For SBA-15 ( Figure 5 f), the strong peak at 1090 cm −1 is associated with the asymmetric stretching of the Si-O-Si bonds in the silicon–oxygen tetrahedral structure, while a weaker band at 804 cm −1 corresponds to the symmetric stretching vibrations. The distinctive vibrational band attributed to Si-OH groups was observed at around 978 cm −1 [ 46 ]. Analysis of the FT-IR spectra depicted in Figure 5 b–e revealed a similarity between the spectra of all UiO-66-Br 2 /SBA-15 composites and that of pure UiO-66-Br 2 .…”
Efficient separation of CH4 from N2 is essential for the purification of methane from nitrogen. In order to address this problem, composite materials consisting of rod-shaped SBA-15-based UiO-66-Br2 were synthesized for the purpose of separating a CH4/N2 mixture. The materials were characterized via PXRD, N2 adsorption–desorption, SEM, TEM, FT-IR, and TGA. The adsorption isotherms of CH4 and N2 under standard pressure conditions for the composites were determined and subsequently compared. The study revealed that the composites were formed through the growth of MOF nanocrystals on the surfaces of the SBA-15 matrix. The enhancements in surface area and adsorption capacity of hybrid materials were attributed to the structural modifications resulting from the interactions between surface silanol groups and metal centers. The selectivity of the composites towards a gas mixture of CH4 and N2 was assessed utilizing the Langmuir adsorption equation. The results of the analysis revealed that the U6B2S5/SBA-15 sample exhibited the greatest selectivity for CH4/N2 adsorption compared to the other samples, with an adsorption selectivity parameter (S) of 20.06. Additional research is necessary to enhance the enrichment of methane from CH4/N2 mixtures using SBA-15-based metal-organic framework materials.
“…For SBA-15 ( Figure 5 f), the strong peak at 1090 cm −1 is associated with the asymmetric stretching of the Si-O-Si bonds in the silicon–oxygen tetrahedral structure, while a weaker band at 804 cm −1 corresponds to the symmetric stretching vibrations. The distinctive vibrational band attributed to Si-OH groups was observed at around 978 cm −1 [ 46 ]. Analysis of the FT-IR spectra depicted in Figure 5 b–e revealed a similarity between the spectra of all UiO-66-Br 2 /SBA-15 composites and that of pure UiO-66-Br 2 .…”
Efficient separation of CH4 from N2 is essential for the purification of methane from nitrogen. In order to address this problem, composite materials consisting of rod-shaped SBA-15-based UiO-66-Br2 were synthesized for the purpose of separating a CH4/N2 mixture. The materials were characterized via PXRD, N2 adsorption–desorption, SEM, TEM, FT-IR, and TGA. The adsorption isotherms of CH4 and N2 under standard pressure conditions for the composites were determined and subsequently compared. The study revealed that the composites were formed through the growth of MOF nanocrystals on the surfaces of the SBA-15 matrix. The enhancements in surface area and adsorption capacity of hybrid materials were attributed to the structural modifications resulting from the interactions between surface silanol groups and metal centers. The selectivity of the composites towards a gas mixture of CH4 and N2 was assessed utilizing the Langmuir adsorption equation. The results of the analysis revealed that the U6B2S5/SBA-15 sample exhibited the greatest selectivity for CH4/N2 adsorption compared to the other samples, with an adsorption selectivity parameter (S) of 20.06. Additional research is necessary to enhance the enrichment of methane from CH4/N2 mixtures using SBA-15-based metal-organic framework materials.
“…Unlike other methods, adsorption is capable of removing a wide range of dye concentrations, and it is relatively easy to design and operate. Furthermore, adsorbents can sometimes be regenerated and reused, reducing the overall cost of the treatment process [18,19]. Nano-metal oxides, due to their high surface area and unique chemical properties, have shown excellent potential in the adsorption of organic dyes.…”
This work studies the synthesis, characterization, and application of CuFe2O4 nanoparticles for the removal of acid blue 113 and malachite green dyes from aqueous media. Utilizing the combustion procedure, CuFe2O4 nanoparticles were synthesized using two different fuels: L-alanine (CFA) and L-valine (CFV). Besides, the synthesized CuFe2O4 nanoparticles were characterized through some tools, including Fourier transform infrared (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and field emission scanning electron microscope (FE-SEM). XRD analysis verified the creation of a CuFe2O4 cubic spinel structure without any contaminants, revealing average crystallite sizes of 26.37 and 17.65 nm for the CFA and CFV samples, respectively. The FTIR spectra exhibited peaks indicative of metal-oxygen bond stretching, verifying the presence of a spinel formation. Elemental analysis via EDX confirmed the stoichiometric composition typical of copper ferrite. In addition, FE-SEM displayed that the CFA and CFV samples are composed of particles with spherical and irregular shapes, measuring average diameters of 188.35 and 132.78 nm, respectively. The maximum adsorption capabilities of the CFA and CFV samples towards acid blue 113 dyes are 281.69 and 297.62 mg/g, respectively. Also, the maximum adsorption capabilities of the CFA and CFV products towards malachite green dye are 280.11 and 294.99 mg/g, respectively. Kinetic and equilibrium studies revealed that the adsorption process of acid blue 113 and malachite green dyes onto the CFA and CFV samples followed the pseudo-second-order model and Langmuir isotherm. Thermodynamic analysis indicated that the adsorption process was physical, spontaneous, and exothermic.
Methylene blue dye in water sources can pose health risks to humans, potentially causing methemoglobinemia, a condition that impairs the blood’s ability to carry oxygen. Hence, the current study investigates the synthesis of novel magnesium borate/magnesium oxide (Mg3B2O6/MgO) nanostructures and their efficiency in removing methylene blue dye from aqueous media. The nanostructures were synthesized using the Pechini sol–gel method, which involves a reaction between magnesium nitrate hexahydrate and boric acid, with citric acid acting as a chelating agent and ethylene glycol as a crosslinker. This method helps in achieving a homogeneous mixture, which, upon calcination at 600 and 800 °C, yields Mg3B2O6/MgO novel nanostructures referred to as MB600 and MB800, respectively. The characterization of these nanostructures involved techniques like X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, N2 gas analyzer, and field-emission scanning electron microscope (FE-SEM). These analyses confirmed the formation of orthorhombic Mg3B2O6 and cubic MgO phases with distinct features, influenced by the calcination temperature. The mean crystal size of the MB600 and MB800 samples was 64.57 and 79.20 nm, respectively. In addition, the BET surface area of the MB600 and MB800 samples was 74.63 and 64.82 m2/g, respectively. The results indicated that the MB600 sample, with its higher surface area, generally demonstrated better methylene blue dye removal performance (505.05 mg/g) than the MB800 sample (483.09 mg/g). The adsorption process followed the pseudo-second-order model, indicating dependency on available adsorption sites. Also, the adsorption process matched well with the Langmuir isotherm, confirming a homogeneous adsorbent surface. The thermodynamic parameters revealed that the adsorption process was physical, exothermic, and spontaneous. The MB600 and MB800 nanostructures could be effectively regenerated using 6 M HCl and reused across multiple cycles. These findings underscore the potential of these nanostructures as cost-effective and sustainable adsorbents for methylene blue dye removal.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.