Surface and electro-optical properties of amorphous Sb2S3 thin films

Synthesis of Sb2S3 nanosphere layer by chemical bath deposition for the photocatalytic degradation of methylene blue dye

“…The obtained results are in agreement with the previously reported XRD data for the Sb 2 S 3 deposited by CBD in different media and different starting sulfur precursors, 37,38 and the reported amorphous Sb 2 S 3 phase prepared by thermal evaporation technique. 39 Fig.…”

Effect of vacuum annealing on the properties of one step thermally evaporated Sb2S3thin films for photovoltaic applications

“…The presence of multiple and sharp reflection peaks revealed the polycrystalline nature of the synthetic powder. The same powder pattern was reported in reference[16]. The good agreement of the experimental values of the reflection peak positions with those reported in the Joint Committee on Powder Diffraction Standards (JCPDS) Card N° 01-074-1046 confirmed the formation of pure Sb2S3 stibnite characterized by an orthorhombic structure with a Pbnm space group.…”

“…Many works [15,16], have studied the effect of the variation in the annealing parameters, such as temperature, time and atmosphere, on the properties of Sb2S3 thin films. Vacuum annealing is one of the most common treatments used, because of its simplicity and effectiveness in improving the physical properties of Sb2S3 thin films.…”

Structural, Optical and Photo Catalytic Properties of CdS Thin Films Synthesized by Green-CBD Method

“…In last two decades the metal oxides, metal sulphides and composite materials has received the greater interest of many researchers due to their considerable properties and use in electronics as well as biotechnology applications. It has been used in optoelectronic devices, solar cell, photovoltaic cells, biotechnology, drug delivery and photocatalytic studies due to their structural and optical properties [1][2][3][4][5][6]. Sb2S3 and CeS thin film material has been synthesized by CBD method at variable pH shows considerable optical band gap energies, surface tension and electrical resistivity with respect to films thickness as used in optoelectronic devices [4].…”

“…It has been used in optoelectronic devices, solar cell, photovoltaic cells, biotechnology, drug delivery and photocatalytic studies due to their structural and optical properties [1][2][3][4][5][6]. Sb2S3 and CeS thin film material has been synthesized by CBD method at variable pH shows considerable optical band gap energies, surface tension and electrical resistivity with respect to films thickness as used in optoelectronic devices [4]. The CuS thin film material deposited by CBD method has considerable refractive index, extinction and dielectric coefficient [5][6][7].…”