Superfícies seletivas em frequência / FSS

Abstract

In this work, the different properties of frequency selective surfaces -FSS are analyzed. Frequency selective surfaces are planar structures with periodic cells and can be classified as a kind of metamaterials. To this end, the working mechanism of these structures has been extensively studied, and a proper method based on the equivalent circuit model in conjunction with fullwave simulations was proposed. The developed tool is useful for a fast preliminary analysis of FSS, which was used to create a database of known elements presented in the literature. Unlike of classical analysis model, the proposed analytical modeling, which is one of the main thesis contributions, uses a simple algorithm for approximate the response of frequency selective surfaces with arbitrary shape, for normal and oblique incidence and for substrates with all thicknesses. In this sense, after the electromagnetic simulation of the structure, it is possible to compute the response of an FSS with different parameters without the time consuming full-wave simulations. The model uses the unique characteristics of High-Impedance Surfaces -HIS, which for certain frequency range, behaves as Perfect Magnetic Conductor -PMC, while outside this band behaves as a Perfect Electric Conductor -PEC, for synthesizing thin planar microwave absorbers.The structures, comprising resistive frequency selective surfaces over a grounded dielectric substrate, are designed aiming different absorption frequency bands and different bandwidths. In the 5.5 GHz frequency range, the aim was to satisfy the specifications of WIMAX, WLAN systems, in view of the IEEE 802.11a standards, as well as radar systems, while signals from other bands can travel across with zero or minimal attenuation. To the highest range, the designed structure provides absorption over 10 GHz to 18 GHz frequency range, and can be applied to the X-and Ku-band.The modeling method for the FSS and the proposed absorbers was physically validated through experimental setups and instrumentation, especially developed for these structures. The ix prototype of the fabricated absorbers are extremely thin and were characterized by using free space and anechoic chamber measurement setups. The designed structures showed excellent performance for measurements ranges, with reflectivity typically below -10 dB over the entire band. The methodology developed in this research can be extended to different frequency bands, bandwidth and applications.