Successive bioanode regenerations to maintain efficient current production from biowaste

Abstract

The long-term operation of efficient bioanodes supplied with waste-derived organics is a key challenge for using bioelectrochemical systems as a waste valorization technology. Here, we describe a simple procedure that allowed maintaining highly efficient bioanodes supplied with biowaste. Current densities up to 14.8 A/m(2) were obtained with more than 40% of the electrons introduced as biowaste being recovered in the electrical circuit. Three fed-batch reactors were started at different biowaste loading rates. A decline of coulombic efficiencies between 22 and 31% was recorded depending on the reactor over the first 3 weeks of operation. A renewal procedure of the anode was thereafter implemented, which led to a recovery of initial performances. The second and the third renewal, allowed maintaining stable high level performances with coulombic efficiency of approximately 40% over at least 3 weeks. Electroactive biofilm dynamics were monitored using 16S rRNA-gene amplicon sequencing. Retrieved sequences were dominated by Geobacter sulfurreducens-related reads (37% of total sequences), which proportion however varied along the experiment. Interestingly, sequences affiliated to various Bacteroidetes groups were also abundant, suggesting an adaptation of the anodic biofilm to the degradation of biowaste through metabolic interactions between microbial community members.

Upscaling of Microbial Electrolysis Cell Integrating Microbial Electrosynthesis: Insights, Challenges and Perspectives

“…Frequently exchange or restart the bioanode would restore the activity of bioanodes but is clearly too slow and too costly for large-scale operations. It is thus indispensable to develop simple and efficient regeneration methods [37].…”

Study of a Pilot Scale Microbial Electrosynthesis Reactor for Organic Waste Biorefinery

“…Restarting or exchanging bioanodes might restore their activity, but it is too slow and expensive for large-scale operations. Procedures for regeneration must be simple and effective [32]. In this work, we designed a 15 L reactor featuring an extraction compartment, a double plate bioanode, and a granular carbon bed MES biocathode.…”

Optimization and modelling of volatile fatty acid generation in a leachate bed reactor for utilization in microbial fuel cells

“…In this regard, Durruty et al (2012) integrated MFC with an anaerobic digester to obtain energy from simulated potato wastewater and reported a 4% increase in energy conversion efficiency. Bridier et al (2015) utilized a fermented substrate in an MFC comprised of potatoes, tomatoes, beef patty, milk powder, biscuits and water. In another study, Xin et al (2018) employed a cylindrical air‐cathode MFC to assist food waste hydrolysis by fungal mash to reach a power density (PD) of 0.173 W/m 3 .…”