SUAS: A Novel Soft Underwater Artificial Skin with Capacitive Transducers and Hyperelastic Membrane

Abstract

The paper presents physical modeling, design, simulations, and experimentation on a novel Soft Underwater Artificial Skin (SUAS) used as tactile sensor. The SUAS functions as an electrostatic capacitive sensor, and it is composed of a hyperelastic membrane used as external cover and oil inside it used to compensate the marine pressure. Simulation has been performed studying and modeling the behavior of the external interface of the SUAS in contact with external concentrated loads in marine environment. Experiments on the external and internal components of the SUAS have been done using two different conductive layers in oil. A first prototype has been realized using a 3D printer. The results of the paper underline how the soft materials permit better adhesion of the conductive layer to the transducers of the SUAS obtaining higher capacitance. The results here presented confirmed the first hypotheses presented in a last work and opened new ways in the large-scale underwater tactile sensor design and development. The investigations are performed in collaboration with a national Italian project named MARIS, regarding the possible extension to the underwater field of the technologies developed within the European project ROBOSKIN.

Soft Robotic Hands and Tactile Sensors for Underwater Robotics

“…When these tactile sensors are employed to a manipulator in the form of an array, an understanding for shape recognition and localized impact forces can be realized more expansively [156]. Muscolo et al reported an electrostatic capacitive tactile sensor potentially effective for underwater use [157]. In this sensing mechanism, a semi-cylindrical surface of flexible conductive artificial skin is separated from an array of capacitive transducers using a high dielectric oil.…”

A New Soft RCC Device with Pneumatic Regulation

“…where ψ is the strain energy function, c 1 and c 2 are constants, and I 1 and I 2 are, respectively, the first and the second invariant [25,28]. All of the simulations were performed with: c 1 = 0.25 MPa, c 2 = 0 MPa, density = 1000 kg/m 3 .…”

“…In this paper, the authors attempted to apply the RCC concept to a new linear variable stiffness pneumatic actuator, which was presented for the first time in [19], and named for convenience using the acronym PATuCCo (Pneumatic Actuator with Tunable-Compliance Constraint). To date, a large number of variable stiffness actuators have been developed but, in general, stiffness is controllable only in the same direction of the actuation [20][21][22][23][24][25]. In [19], the authors proposed a novel pneumatic actuator with tunable compliance that is able to modify the general stiffness of its internal constraints due to the use of rolling diaphragm seals for separating the actuator's chambers.…”

Dynamic Balance of the Head in a Flexible Legged Robot for Efficient Biped Locomotion

“…Robotics is a multidisciplinary research field, increasingly present in nowadays daily life. Robotics is modifying the classical design concepts, joining mechanics, electronics, and computer science knowledge, including life science considerations, resulting in the design of novel systems, which actively interact with the environment [1][2][3]. The design of such systems is innovative and includes many more aspects than classical systems design, e.g., variable stiffness actuators, soft robotics, dielectric elastomer actuators, artificial skins.…”