Study on Transverse Strength of the Deck-Container Ships due to Laying All Containers on Deck

Abstract

The strength of transversal structure of the ship has a great effect on the safety of ship. Shipswill experience conditions that affect the strength of the ships structure. A deck-container ships are the ships that all container are loaded on deck such as MV. Khendaga Nusantara series ships. The transversal strength of the ships is loaded mainly by the weight of cargolaying on deck.. This research aims to determine the transverse strength of a deck-container ship due to the all container loads on deck. The research was done by usingfinite element method throughmodeling transverse ship structure, the simulation is conducted by varying the amount and lay-out of containers on dec). The loads appliedto the model are side loads, bottomloads, and deck loads in according to BKI rules. The results shows that the stress that occurred in the web frame was 140,63 N/mm2due to the placement of the entire container on the deck(full loading). For ship structure response, a deformation of 2,86 mm occurred in the web frame area at maximum loading. Stress ratio that occurs in all ship’s structuredoes not exceed 1 in other words the working stress does not exceed the allowedstress according to BKI rules.

Respon struktur akibat perubahan jarak stiffener pada car deck Kapal Ferry Ro-Ro

“…adalah tegangan maximum yang bekerja pada struktur serta SF adalah safety factor (SF>1) [12]. Salah satu cara melihat keamanan konstruksi dengan mengamati nilai stress ratio yang diperoleh dengan membandingkan tegangan yang terjadi pada konstruksi akibat beban luar yang bekerja dan tegangan ijin material dimana nilai stress ratio harus bernilai lebih kecil dari 1 (<1) [13].…”

Fatigue Life Analysis of Ramp Door Ferry Ro-Ro Gt 1500 Using Finite Element Method

“…Alamsyah et al, analyzed the strength of pontoon lift and its fatigue life using FEM [6]. Munandar et al, investigated the transverse strength of the container ship's deck due to all container loads using FEM [7]. The finite element analysis application works with the finite element method system where the solution to the object is done by discretizing it by dividing or splitting the object of one unit into a finite number of elements, namely into smaller parts connected by nodes.…”

Fatigue Life Assessment of Sideboard on Deck Barge Using Finite Element Methods

“…One of the assessments carried out is to determine the strength of the construction. It is conducted by detecting the stress ratio in which it is compared to the working stress that occurs in the construction due to external loads that happened on the ship with the allowable stress of the material [10]. To fulfill the allowable stress (yield strength), the modulus of construction is increased by increasing the thickness of the plate or longitudinal carling [11].…”