Study on the Flexural Behavior of Steel-Concrete Composite Beams Based on the Shear Performance of Headed Stud Connectors

Abstract

Headed studs have been widely used as shear connectors in steel-concrete composite beams for a long time. Studies on the influence of the different shear properties of headed studs on the flexural behavior of the composite beams have been inconclusive. In this research, we studied the shear performance influence of headed studs by conducting static push-out tests on seven designed push-out specimens. The flexural behavior of a steel-concrete composite beam connected by studs was discussed in detail by conducting a two-point symmetric monotonic static loading test. Based on the actual situation of the composite beam test, a finite element numerical model was established and validated, in which the elastic connections units were used to simulate the studs, and the force–slip data obtained from the push-out tests were used as the constitutive model of the studs. The effects of the stud diameter, stud height, the number of studs arranged, and concrete strength on the flexural behavior of the composite beams were analyzed and compared. The results showed that the number of studs arranged had a significant influence on the flexural behavior of the composite beams, followed by the strength of the concrete. The specifications of the studs had little effect on the flexural behavior of the composite beams within the study scope using the modeling method in this paper.

Fracture Behavior of Headed Studs: Ductile Fracture of Cold Heading Steel ML15

“…This metal is widely used in studs of steel-concrete composite structures in China. Zhang [21] and Alsharari [22] studied the mechanical property of studs, but did not investigate the ductile failure of studs. To do so, tensile tests of smooth and notched bars, flat grooved and tensile-shear flat specimens were tested.…”