Study on Mechanical Properties of Permeable Polymer Treated Loess

Abstract

The reinforcement and durability of loess are of great importance for road performance. In this study, a self-designed grouting system and newly permeable polymers were adopted to investigate the mechanical properties and durability of solidified loess (SL), considering different dry densities and water contents. The unconfined compression test and piezocone penetration (CPTU) test were used to examine the mechanical properties. The mechanism of the loess solidified by permeable polymer was analyzed from the micro-level by SEM, MIP, and XRD tests. The test results show that the effect of polymer grouting is obvious, the unconfined compressive strength (UCS) of the SL after grouting is as high as 3.05–5.42 MPa; it is 11.83–20.99 times that of unsolidified loess (UL). The UCS of the SL after grouting is inversely proportional to the dry densities and water contents. After 56 days of immersion, the SL still shows a high compressive strength. The additional erosion of the SL was not caused by the salt solution; the durability is significantly better than that of cement mixing soil. The sensitivity of various factors on the UCS of the SL are service environment > water content > dry density. The SEM tests clearly show that the gel formed by the reaction of the polymer with water on the surface of soil particles makes the bond of soil particles tighter. It can be observed from the MIP test that the cumulative mercury of SL was 0.115 mL/g, which was 33.72% of UL (0.341 mL/g), and the cumulative mercury of SL after immersion in water and salt solutions was 0.183 mL/g and 0.175 mL/g, which was 53.7% and 51.3% of UL (0.341 mL/g), respectively. The XRD results show that there are no other new mineral components produced after grouting and the spacing between crystalline planes decreases, which proves that permeable polymer grouting makes the soil denser and does not erode the soil particles.

Prediction Model of Coal Gas Permeability Based on Improved DBO Optimized BP Neural Network

“…The compressive strength plays a crucial role in determining the compactness of particle arrangement within the coal. Greater compressive strength corresponds to smaller particle gaps and lower permeability [20]. These non-linear factors interact with each other to collectively determine changes in gas permeability within coal.…”

Fiber Solidification Treatment of River and Lake Wastewater and Sediments: Deformation Characteristics and Microscopic Mechanism Research

“…Common solidifying agents for solidified soil include cement, quicklime, and fly ash. Numerous scholars have conducted experiments employing various methods, with a primary emphasis on saline soil [3][4][5][6][7][8], loess [9][10][11][12][13][14], and other typical soil types [15][16][17]. The existing studies show a comparatively limited focus on the solidification of dredged sediment from rivers and lakes.…”

Experimental Investigation on Reinforcement Application of Newly Permeable Polymers in Dam Engineering with Fine Sand Layers

“…Wang et al [27] designed a visual constant pressure grouting test device to investigate the polymer's diffusion and reinforcement mechanisms in silt under different pressures. Permeable polymers have been widely used in the reinforcement of dam and subgrade engineering [28,29]. The strength and impermeability of permeable polymers have been investigated.…”