Study on material and mechanical characteristics of silicone rubber shed of field-aged 110 kV composite insulators

Abstract

Composite insulators have excellent performance and are more and more widely used in power grid. The performance of composite insulators with different service duration will decline in varying degrees, which could pose a threat to the safe operation of power grid. In order to investigate the influence of service duration and electric field strength on insulator shed performance, the sheds at different positions of insulators with different service duration are sampled. The hydrophobicity, material and mechanical properties of the samples are tested, and then the micro material properties tests are performed in terms of SEM, FTIR and XPS tests. Based on the above test results, the aging law and its mechanism of silicone rubber sheds are analyzed. The results reveal that the performance of insulator shed gradually decline with the increase of service life. The hydrophobicity and hardness of high-voltage end insulator are similar to that of middle section insulator, while other parameters are obviously different, indicating that the electric field can aggravate the aging. FTIR results show that the main chain and hydrophobic side chain of silicone rubber are destroyed, and the oxygen-containing groups increased, indicating that thermal oxygen aging occurred during operation. XPS and SEM results show that the crosslinking degree of silicone rubber increases and the porosity increases. The above changes in the microstructure of silicone rubber lead to the decline of insulator performance.

Silicone rubber thermal aging performance for cables and accessories

“…This does not apply to the actual conditions where the cable runs under power frequency voltage for a long time and may withstand operating overvoltage and lightning overvoltage. In addition, semiconducting shielding materials need to have low enough volume resistivity and long-term use resistivity stability at different temperatures to ensure long-term stable operation of the cable [6,7].…”