Study on involute rotor profile based on pressure angle reduction

Liu, Linlin; Chen, Peijun; Du, Jinqiao; Wang, Xinyi

doi:10.1088/1742-6596/1550/4/042002

Cited by 2 publications

(1 citation statement)

References 2 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…To improve the area utilization ratio, Wang et al 8 constructed a novel eccentric involute screw rotor for the twin-screw vacuum pump, and established its geometric model. Liu et al 9 improved the cross-sectional profile of the traditional involute rotor by reducing the pressure angle, and its cross-sectional profile was described by parameter equations. In order to reduce the length of the spatial contact curve and leakage triangle area, Zaytsev et al 10 proposed a method for generating the rotor profile of the twin-screw compressor according to a meshing line.…”

Section: Introductionmentioning

confidence: 99%

Theoretical model and simulation of a twin-Screw multiphase pump with novel smooth screw rotors for gas-Oil mixed transportation

Pan

Wang

Zhao

et al. 2023

Proceedings of the Institution of Mechanical Engineers, Part A:

View full text Add to dashboard Cite

A pair of screw rotors, the core components of twin-screw multiphase pumps, primarily determine the pump performance. The conventional screw rotor contains unsmooth edges caused by unsmooth points in the cross-sectional profiles, which will lead to the abrasion, wear and fatigue near the unsmooth edges of the screw rotors during operation. For solving this problem, a novel pair of fully smooth screw rotors without unsmooth edges were proposed, and their cross-sectional profiles composed of the elliptical arcs and their conjugate curves were put forward. Parametric equations of the proposed screw rotor profiles were also derived, and then the effects of geometric parameters on the pump performance of the proposed screw rotors were discussed. Furthermore, the transient flow of the twin-screw multiphase pump with the proposed screw rotors were carried out by numerical simulations. The distributions of pressure and velocity in the proposed pump were obtained. The gap leakage and backflow velocity at each gap varying with time and location in the working process were also analyzed. The results indicate that the carryover of the proposed screw rotors is reduced by 90.49%, while its area utilization ratio is increased by 0.8%, and the length of the spatial contact curve is reduced by 25.71% in comparison with the conventional screw rotors. Thus, the superiority and feasibility of the proposed screw rotors are validated.

show abstract

Section: Introductionmentioning

confidence: 99%