Study on gear contact stiffness and backlash of harmonic drive based on fractal theory

Abstract

Contact stiffness and backlash in the harmonic drive significantly impact a robot's positioning accuracy and vibration characteristics. The height of the harmonic drive tooth pair is typically less than 1 mm, making the measurement and modeling of backlash and contact stiffness inherently complex. This paper proposes a contact stiffness and backlash model by establishing a correlation between fractal parameters and tooth contact load. To obtain the fractal roughness parameters of the real machined tooth surface, a combination of a noncontact optical profiler and the RMS method is employed. Subsequently, the study explores the influence of rough tooth surface and contact force fractal parameters on contact stiffness and gear backlash. The results demonstrate the substantial impact of surface topography parameters and contact force on contact stiffness and backlash. Specifically, an increase in the fractal dimension correlates with a reduction in gear backlash and contact stiffness. Conversely, the fractal roughness parameter exhibits the opposite effect. Notably, an increase in contact force enhances contact stiffness.