Study on Flow and Heat Transfer in Single Rock Fractures for Geothermal Heat Extraction

Abstract

A full understanding of the fluid flow and heat transfer behaviors within a single fracture is important for geothermal heat extraction. In this study, models of single fractures with varying aperture and inner surface roughness (characterized by fractal dimension) are constructed, and a compound fracture aperture (CFA) is proposed to describe the coupled effect of fracture aperture and inner surface roughness. The effect of the fluid flow Reynolds number on heat transfer was investigated as it ranged from 4.84 to 145.63. The results show that the overall heat transfer coefficient (OHTC) in a single fracture significantly increases with the rise in fluid velocity and the compound fracture aperture. Particularly, the OHTC in a single fracture with an inner surface fractal dimension of 2.09 can be up to 1.215 times that of a parallel flat fracture when the flow velocity reaches 0.18 m/s. Moreover, for a fracture with a smaller CFA, enhancing the fracture aperture plays a decisive role in increasing the OHTC. Aperture emerges as a more sensitive optimization parameter for efficient heat extraction compared to the flow velocity. Meanwhile, based on simulation results, a convective heat transfer correlation equation is derived to provide more accurate estimates of the OHTC in rock fractures with different geometries and morphological features.