Study of Twisted Tape Inserts Segmental Application in Low-Concentrated Solar Parabolic Trough Collectors

Abstract

This article presents the results of an analysis of heat enhancement intensification using twisted tapes in linear absorbers for low-concentration parabolic trough collectors, a technology frequently considered as a supplementary energy source for industrial heat production. This contribution proposes a segmented application of different twisted tapes to intensify heat absorption. A 33.7 mm tubular absorber placed in the collector focal point with an aperture of 1.8 m was selected. The temperature range of the heat transfer fluid was chosen at 60–250 °C. The impact of inserts with twisted ratios of 1, 2 and 4 on system operation was analysed using the Ansys Fluent and mathematical model. The models used were validated based on experimental results from a parabolic trough collector with solar simulator test bench. The results indicated that for the range of mass flow between 0.15–0.3 kg/s, the most optimal is applying twisted ratio 1, except for the highest-temperature section. In this section, it is more optimal to use an insert with a twisted ratio 2, due to the lower need for pumping and the higher efficiency increment. The long-term analysis for the case study plant indicated that the proposed approach increased power gain by 0.27%.

Optical Developments in Concentrator Photovoltaic Systems—A Review

“…A recent study [146] was conducted by the National Technical University of Athens to enhance optical efficiency by 15.44%. The authors from Poland experimented with the performance of a CSP system which achieved optical efficiency of 75% and a power gain of 0.27% [147]. In [148], a CPV/T system was designed to experience an increase in the heat transfer coefficient up to 60%.…”